Part of the G&H Flat Plate range. The plate is just 1 mm thick, we recommend all wall boxes are sunk into the wall to ensure a flush fitting. The plate is made from brass which is then treated to achieve an aged appearance, then polished and lacquered. Please note, each plate will be unique as this is a process done by hand. The plates will differ slightly from the photos and will differ from each other. Every plate is different.
G&H Brassware are a UK manufacturer of high quality switches and sockets. All G&H plates are manufactured to the highest standard from solid brass or steel and are covered by a 1 year guarantee. All plates come supplied with two screws coloured to suit the plate. The entire range fits into UK standard wall boxes (see below for depth recommendations).
Technical details:
Rocker Light Switches:
Plate size: 85mm x 85mm (1 gang, 2 gang & 3 gang)
Plate size: 145mm x 85mm (4 gang)
Use as 1 or 2 way (1 gang intermediate also available)
Required back box depth: 25mm or deeper
Rated Amps: 10A
Toggle Light Switches:
Plate size: 85mm x 85mm (1 gang & 2 gang)
Plate size: 145mm x 85mm (3 gang & 4 gang)
Use as 1 or 2 way (1 gang intermediate also available)
Required back box depth: 25mm or deeper
Rated Amps: 10A
Single & Double Plug Sockets:
Plate size: 85mm x 85mm (single)
Plate size: 145mm x 85mm (double)
Required back box depth: 25mm or deeper (recommend 35mm unless box is sunk into wall)
Rated Amps: 13A. USB Chargers: 1 x USB A 3.1A & 1 x USB C 3.1A. If both sides used the charge is split.
Dimmer Switches Rotary:
Push on/off and turn to dim.
Plate size: 85mm x 85mm (1 gang & 2 gang)
Plate size: 145mm x 85mm (3 gang & 4 gang)
Required back box depth: 35mm or deeper
400W: 40w minimum load, 400w maximum load. Halogen Only
700W: 150w minimum load, 700w maximum load. Halogen Only
LED: 1 to 10 LED bulbs (max 120W). 300W max load if used with halogen bulbs.
Use as 1 or 2 way (2 way only with an on/off switch)
20 Amp Switches:
Plate size: 85mm x 85mm
Required back box depth: 25mm or deeper
Rated Amps: 20A DP (Double Pole)
45 Amp Switches:
Plate size: 85mm x 85mm (single)
Plate size: 145mm x 85mm (double with 13A socket)
Required back box depth: 35mm or deeper
Rated Amps: 45A DP (Double Pole)
Shaver Sockets:
Plate size: 145mm x 85mm
Required back box depth: 47mm
Rated Voltage: 115V~240V AC
2 & 5 Amp Sockets:
Plate size: 85mm x 85mm
Required back box depth: 25mm or deeper
Rated Amps: 2A / 5A
TV, Satellite, RJ45, BT, Fuse, Flex, Triax, Phono & Fan Isolator Sockets:
Plate size: 85mm x 85mm
Required back box depth: 25mm or deeper
Euro Plates:
Plate size: 85mm x 85mm (single)
Plate size: 145mm x 85mm (double)
These are empty designed for modular inserts to clip in.
Required back box depth: Depends on module type.
Blank Plates:
Plate size: 85mm x 85mm (single)
Plate size: 145mm x 85mm (double)
Required back box depth: 16mm or deeper
All purchases are covered by a full manufacturer’s warranty and are covered by our 30 day return period for unwanted products (please see our delivery and returns section for further information). All prices include VAT.