Condition: BRAND NEW IN ORIGINAL PACKAGING

Warranty: 2 YEAR MANUFACTURER

Package Includes:

• (1) 2014-2017 Polaris Ranger 10" 500w Powered Under-Seat MTX Subwoofer+Sub Enclosure
• (1) Rockville RGHR2 Marine Gauge Hole Receiver w Bluetooth USB, Radio + Wired Remote

---

Authorized MTX Audio Dealer!

Description of RANGER-10:

Bringing the Bass
The RANGER-10 is designed for use in Polaris Ranger vehicles. This durable 10" subwoofer and 250-watt integrated amplifier is designed for Polaris Ranger vehicles and allows you to get bass in your UTV without losing any of your space. The custom designed enclosure mounts under the driver's side seat and once installed, is invisible. MTX has been making vehicle specific subwoofer enclosures for over 25 years and nobody knows how to do it better.

OEM Finish
The MTX RANGER-10 is a subwoofer enclosure designed to mount directly under the driver's side seat of specific Polaris RANGER UTV models. The subwoofer enclosure is rotationally molded using linear low density polyethylene (LLDPE) creating a durable finish that is weather resistant and durable. The enclosure mounts under the drivers's side front or rear seat using existing mounting locations and does not require any cutting or drilling to install. The enclosure includes a 10" weather resistant 250-watt RMS subwoofer featuring a polypropylene cone that delivers exceptional low frequency output. The unit includes an integrated 250-watt class D amplifier that only requires power and signal. This saves riders from having to purchase a separate amplifier to power their enclosure and to find a place to mount it. The MTX RANGER-10 is self-contained and ready to deliver the bass that MTX is known for.

Features:

• 2014-2017 Polaris Ranger 10" 500 Watt Powered Under-Seat MTX Subwoofer and Enclosure
• RMS Power Handling: 250 Watts
• Peak Power Handling: 500 Watts
• Frequency Response: 31 Hz - 130 Hz
• Weather Resistant: IP66 Rated
• OEM Fit
• Integrated Amplifier
• Low Level Input with External Gain Control
• High Efficiency 10" Polypropylene Subwoofer
• Mounts Under Driver's Seat on 2-Door Models and Under Rear Driver's Side Seat on 4-Door Models
• No Cutting or Drilling Required

---

All about your RGHR2:

How To Set Up Your RGHR2:

Included in the box:

• Marine digital media receiver
• Wired remote with 32.8 foot wire
• USB extension cable (40 inches)
• Mounting bracket
• Screws
• ISO wiring
• Owner manual and warranty

Description:

The Rockville RGHR2 is the best gauge hole receiver on the market. We developed this to give you the best sound and the best features.

Crazy loud!
We put in a built in amplifier that is louder than other marine receivers on the market. The RMS power of the built in amp is 28 watt x 4 channels! It is crazy loud and can be heard over the sound of the wind when you are on the water! There is also a built in EQ to customize the sound to your taste.

Included wired remote
Rockville is the only brand on the market that I know of that supplies a wired remote with your radio. The wired remote is a must have for any marine radio. This is great for boats and other powersport applications. We also include an extra long 32.8 foot wire so you will not need any additional extension cables.

Latest listening features
The RGHR2 gives you many listening options. The Bluetooth technology allows you to stream audio from your Bluetooth enabled phone or other music player to the receiver. Our Bluetooth distance is 50 feet! There is also a USB input allowing you to listen to music stored on a thumb drive. You can plug in any audio device to the auxiliary input. There is a built in radio with crystal clear reception as well.

Ability to connect multiple external amps
This receiver makes your system expandable. Two sets of pre-amp outputs allow you to hook up external amps for your speakers and/or subs. This has front and switchable rear/sub pre-amp outputs so you can amplifiy your speakers and a subwoofer amplifier.

Features:

• Rockville RGHR2 Weather Resistant Gauge-Hole Digital Media Receiver w/Bluetooth/USB/AM/FM
• Fits into a standard Gauge-Hole (Tachometer) Opening
• Built-in 72 x 4 Watt Peak high powered amplifier (28 x 4 RMS)
• Built in EQ with preset EQ curves (Pop, Class, Rock, Flat)
• IP66 Waterproof Certification (Tested to withstand the elements)
• USB Input to play back audio files store on a USB thumb drive or any other USB device
• RCA Aux Input
• AM/FM Radio Built In with 18 FM and 12 AM presets + US and European tuning
• Bluetooth built in to stream audio from any Bluetooth enabled device
• USB Input Charges Your Phone
• Two Sets of RCA Outputs (Front and a switchable rear/sub) allow you to connect external amplifiers
• Big easy to use buttons
• Backlit LCD display
• Wired Remote Control Included (normally $50)
• Required cutout: 2.96" (diameter) x 2.75" (depth)
• USB is 500mA and 5V and supports 16GB max
• Dimensions:
• 2.96" cutout mounting diameter
• 4.45" diameter top plate
• 3.9" mounting depth (not including top plate)
• 5.0" depth including the top plate
• Specs of the built in amplifier:
• TDA7851L quadbridge power amplifier
• 4 x 72 watts peak @ 2 ohm
• 4 x 48 watts peak @ 4 ohms
• 4 x 28 watts RMS @ 4 ohms
• Highly efficient even when running at 2 ohms!
• Low distortion even at top volumes

AudioSavings Return Policy:

At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.

Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 2 YEAR

If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:

• We will send you a pre-paid shipping label to replace the item for a brand new one.
• We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
• If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.

Replacement/Processing Time:

Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items

Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.