Features:
1, All copper AC electric motor, stable operation
2, high efficiency, cut off time 2-3 seconds
3, large factory products, high quality
4, cut off without sparks, no dust, safer.
5, A variety of models to choose, more convenient.

Parameters:
Voltage: AC 220V or AC 110V
Cutting range: 4-16mm, 4-20mm, 4-25mm
Cutting time: 2-4 seconds
Other parameters: as picture show

Precautions:
1. Please do not test the capacity of this machine with steel bars exceeding the size and hardness.
2. Before cutting the steel bar. The position of the screw must be adjusted
3. regular replacement of the blade position, a pair of cutter heads can be used on all four sides, cut 1000 times per side
4. replace the hydraulic oil every 3 months
5. Clean the motor commutator once a month and clean it with an air gun. And check the carbon brush.
6. Keep the top hole of the machine unobstructed to prevent blockage.
7. After the machine has been cut 70 times in a row, wait for the machine to cool before using it.
8. If the machine is stuck, open the pressure relief valve and return the machine. You cannot force the cut to continue.

Package include:
1x Electric Rebar Cutter