DSO8000E Series
Six en un: Oscilloscope / Enregistreur / DMM / Analyseur de spectre / Compteur de fréquence / Générateur de formes d'onde arbitraires.
Classé IP-51 pour résister à la poussière, aux gouttes et aux secousses pour résister aux environnements difficiles. Le gros fusible est conforme à la norme de sécurité européenne.
Indicateur de batterie avec points de connexion faciles à changer. Boîte de batterie 18650 sélectionnable pour correspondre à la batterie 18650 par vous-même.
Trou de verrouillage antivol, trou fixe pour trépied, corde de suspension, lumière FLASH pouvant être utilisée dans l'obscurité. Joints de sécurité BNC remplaçables et un jeu de joints supplémentaire.
Fréquence d'échantillonnage de 1 GSa / s, profondeur de mémoire 2M, DMM 6000 points. Grand écran LCD couleur TFT de 5,6 pouces; Haute résolution (640 * 480)
Caractéristiques
* Six en un: Oscilloscope / Enregistreur / DMM / Analyseur de spectre / Compteur de fréquence / Générateur de forme d'onde arbitraire.
* Classé IP-51 pour résister à la poussière, aux gouttes et aux secousses pour résister aux environnements difficiles.
* Le gros fusible confirme la norme de sécurité européenne.
* Indicateur de batterie avec points de connexion faciles à changer. Boîte de batterie 18650 sélectionnable pour correspondre à la batterie 18650 par vous-même.
* Trou de verrouillage antivol, trou fixe pour trépied, corde de suspension, lumière FLASH pouvant être utilisée dans l'obscurité.
* Oscilloscope à bande passante élevée 70 MHz-200 MHz, fréquence d'échantillonnage 1 GSa / s, profondeur de mémoire 2 M.
* 25Mz Arb. Générateur de formes d'onde, DDS 200 Mesa / s, résolution verticale 12 bits, facile à simuler le transducteur
* 6000 comptes DMM, tension AC / DC, courant AC / DC, résistance, rupture, capacité et fonction de diode.
* Analyse spectrale FFT; Waveform Math: additionnez, soustrayez, multipliez et divisez; Mode X-Y; plus de 20 mesures automatiques; Fonction de vérification PASS / FAIL, s'applique à l'application d'ingénierie.
* Fonction de déclenchement abondante, double échantillonnage de base de temps, facile à observer deux formes d'onde à des fréquences différentes.
* Enregistrez et rejouez plus de 1000 formes d'onde.
* Grand écran LCD couleur TFT 5,6 pouces; Haute résolution (640 * 480)
* Interface USB Host / Device 2.0 pleine vitesse; supporte le disque amovible; Option WIFI / LAN, facile à contrôler par PC ou longue distance.
* Les données de forme d'onde peuvent être sorties en WORD, EXCEL, BMP, JPG en temps et en tension.
| Model | DSO8072E | DSO8102E | DSO8152E | DSO8202E |
| Acquisition | ||||
| Sample Modes | Real-Time Sample | |||
| Acquisition Modes | ||||
| Normal | Normal data only | |||
| Peak Detect | High-frequency and randon glith capture | |||
| Average | Wavefom Average, selectable 4,8,16,32,64,128 | |||
| Inputs | ||||
| Inputs Coupling | AC, DC, GND | |||
| Inputs Impendance | 1MΩ±2% ‖20pF±3pF | |||
| Probe Attenuation | 1X, 10X | |||
| Supported Probe Attenuation Factor | 1X, 10X, 100X, 1000X | |||
| Maximum Input Voltage | CAT I and CAT II: 300VRMS (10×), Installation Category; CAT III: 150VRMS (1×) | |||
| Horizontal System | ||||
| Sample Rate Range | 1GS/s | |||
| Waveform Interpolation | (sin x)/x | |||
| Record Length | 2M | |||
| SEC/DIV Range | 4ns/div~2000s/div, in a 2, 4, 8 sequence | 2ns/div~2000s/div, in a 2, 4, 8 sequence | ||
| Sample Rate and Delay Time Accuracy | ±50ppm over any ≥1ms time interval | |||
| Scanning Speed Range | 4ns/div to 8ns/div; (-8div x s/div) to 40ms; 20ns/div to 80μs/div;(-8div×s/div) to 40ms; 200μs/div to 40s/div;(-8div×s/div) to 400s; | 2ns/div to10ns/div;(-4div×s/div) to 20ms; | ||
| Delta Time Measurement Accuracy (Full Bandwidth) | Single-shot, Normal mode:± (1 sample interval +100ppm × reading + 0.6ns); >16 averages:± (1 sample interval + 100ppm × reading + 0.4ns); Sample interval = s/div ÷ 200 | |||
| Vertical System | ||||
| Vertical Resolution | 8-bit resolution, all channel sampled simultaneously | |||
| Volts Range | 2mV/div to 100V/div at input BNC | |||
| Bandwidth | 70MHz | 100MHz | 150MHz | 200MHz |
| Rise Time at BNC( typical) | 5ns | 3.5ns | 2.3ns | 1.8ns |
| Analog Bandwidth in Normal and Average modes at BNC or with probe, DC Coupled | ±400V(100V/div-20V/div); ±50V(10V/div-5V/div); ±40V(2V/div-500mV/div); ±2V(200mV/div-50mV/div); ±400mV(20mV/div-2mV/div); | |||
| Math | +, -, *, /, FFT | |||
| FFT | Windows: Hanning, Flatop, Rectamgular, Bartlett, Blackman; 1024 sample point | |||
| Bandwidth Limit | 20MHz | |||
| Low Frequency Response (-3db) | ≤10Hz at BNC | |||
| DC Gain Accuracy | ±3% for Normal or Average acquisition mode, 100V/div to 10mV/div. ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div. | |||
| DC Measurement Accuracy, Average Acquisition Mode | Measurement Type: Average of ≥16 waveforms with vertical position at zero Accuracy: ± (3% × reading + 0.1div + 1mV) when 10mV/div or greater is selected. Measurement Type: Average of ≥16 waveforms with vertical position not at zero Accuracy: ± [3% × (reading + vertical position) + 1% of vertical position + 0.2div]. | |||
| Volts Measurement Repeatability, Average Acquisition Mode | Delta volts between any two averages of ≥16 waveforms acquired under same setup and ambient conditions | |||
| Trigger System | ||||
| Trigger Types | Edge, Video, Pulse, Slope, Over time, Alternative | |||
| Trigger Source | CH1, CH2, AC Line | |||
| Trigger Modes | Auto, Normal, Single | |||
| Coupling Type | DC, AC, HF Reject, LF Reject, Noise Reject | |||
| Trigger Sensitivity (Edge Trigger Type) | DC(CH1,CH2): 1div from DC to 10MHz; 1.5div from 10MHz to 100MHz; 2div from 100MHz to Full; AC: Attenuates signals below 10Hz ; HF Reject: Attenuates signals above 80kHz; LF Reject: Same as the DC-coupled limits for frequencies above 150kHz; attenuates signals below 150kHz. | |||
| Trigger Level Range | CH1/CH2: ±8 divisions from center of screen; | |||
| Trigger Level Accuracy( typical)Accuracy is for signals having rise and fall times ≥20ns | CH1/CH2: 0.2div × volts/div within ±4 divisions from center of screen; | |||
| Set Level to 50%(typical) | Operates with input signals ≥50Hz | |||
| Video Trigger | ||||
| Video Trigger Type | CH1, CH2: Peak-to-peak amplitude of 2 divisions; | |||
| Signal Formats and Field Rates | Supports NTSC, PAL and SECAM broadcast systems for any field or any line | |||
| Holdoff Range | 100ns ~ 10s | |||
| Pulse Width Trigger | ||||
| Pulse Width Trigger Mode | Trigger when (< , >, = , or ≠); Positive pulse or Negative pulse | |||
| Pulse Width Trigger Point | Equal: The oscilloscope triggers when the trailing edge of the pulse crosses the trigger level. Not Equal: If the pulse is narrower than the specified width, the trigger point is the trailing edge. Otherwise, the oscilloscope triggers when a pulse continues longer than the time specified as the Pulse Width. Less than: The trigger point is the trailing edge. Greater than (also called overtime trigger): The oscilloscope triggers when a pulse continues longer than the time specified as the Pulse Width | |||
| Pulse Width Range | 20ns ~ 10s | |||
| Slope Trigger | ||||
| Slope Trigger Mode | Trigger when (< , > , = , or ≠ ); Positive slope or Negative slope | |||
| Slope Trigger Point | Equal: The oscilloscope triggers when the waveform slope is equal to the set slope. Not Equal: The oscilloscope triggers when the waveform slope is not equal to the set slope. Less than: The oscilloscope triggers when the waveform slope is less than the set slope. Greater than: The oscilloscope triggers when the waveform slope is greater than the set slope. | |||
| Time Range | 20ns ~ 10s | |||
| Overtime Trigger | ||||
| Over Time Modee | Rising edge or Falling edge | |||
| Time Range | 20ns ~ 10s | |||
| Alternative Trigger | ||||
| Trigger on CH1 | Internal Trigger: Edge, Pulse Width, Video, Slope | |||
| Trigger on CH2 | Internal Trigger: Edge, Pulse Width, Video, Slope | |||
| Trigger Frequency Counter | ||||
| Readout Resolution | 6 digits | |||
| Accuracy (typical) | ±30ppm (including all frequency reference errors and ±1 count errors) | |||
| Frequency Range | AC coupled, from 4Hz minimum to rated bandwidth | |||
| Signal Source | Pulse Width or Edge Trigger modes: all available trigger sources The Frequency Counter measures trigger source at all times, including when the oscilloscope acquisition pauses due to changes in the run status, or acquisition of a single shot event has completed. Pulse Width Trigger mode: The oscilloscope counts pulses of significant magnitude inside the 1s measurement window that qualify as triggerable events, such as narrow pulses in a PWM pulse train if set to < mode and the width is set to a relatively small time. Edge Trigger mode: The oscilloscope counts all edges of sufficient magnitude and correct polarity. Video Trigger mode: The Frequency Counter does not work. | |||
| Measure | ||||
| Cursor Measurement | Manual: Voltage difference between cursors: △V Time difference between cursors: △T Reciprocal of △T in Hertz (1/ΔT); Tracing: The valtage and time at a waveform point; | |||
| Auto Measuerment | Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, | |||
| Waveform Generator Mode | ||||
| Frenquency Range | 1Hz(DC)~25MHz | |||
| DAC Clock | 2K~200MHz adjustable | |||
| Memory Depth | 4KSa | |||
| Vertical Resolution | 12 Bits | |||
| Stability | <30ppm | |||
| Amplitude | ±3.5V Max. | |||
| Output Impedance | 50 Ω | |||
| Output Current | 50mA Ipeak=50mA | |||
| System Bandwidth | 25M | |||
| Harmonic Wave Distortion | -50dBc(1KHz), -40dBc(10KHz) | |||
| General Specifications | ||||
| Display Resolution | 640 horizontal by 480 vertical pixels | |||
| Display Contrast | Adjustable (16 gears) with the progress bar | |||
| Probe Compensator Output | ||||
| Output Voltage( typical) | About 2Vpp into ≥1MΩ load | |||
| Frequency(typical) | 1kHz | |||
| Power Supply | ||||
| Supply Voltage | AC Input:100-240VACRMS,0.6A MAX,50Hz~60Hz; DC Output:9V,2A | |||
| Power Consumption | <30W | |||
| Environmental | ||||
| Temperature | Operating: 32℉ to 122℉ (0℃ to 50℃); Nonoperating: -40℉ to 159.8℉ (-40℃ to +71℃) | |||
| Cooling Method | Convection | |||
| Humidity | +104℉ or below (+40℃ or below): ≤90% relative humidity; 106℉ to 122℉ (+41℃ to 50℃): ≤60% relative humidity | |||
| Altitude | Operating: Below 3,000m (10,000 feet); Nonoperaring: Below 15,000m(50,000 feet) | |||
| Mechanical | ||||
| Size | 260mmmm; 220mm; 75mm | |||
| Weight | 2.5KG(without Packing) | |||
| DMM Mode | |||
| Max. Resolution | 6000 Counts | ||
| DMM Testing Modes | Voltage, Current, Resistance, Capacitance, Diode & Continuity | ||
| Max. Input Voltage | AC:600V, DC: 800V | ||
| Max. Input Current | AC: 10A, DC:10A | ||
| Input Impedance | 10MΩ | ||
| DMM TrendPlot | 1.2M Point | ||
| Range | Resolution | Accuracy | Resolution |
| DC Voltage | 60.00mV | ±1%±3 digit | 10uV |
| 600.0mV | 100uV | ||
| 6.000V | 1mV | ||
| 60.00V | 10mV | ||
| 600.0V | 100mV | ||
| 800V | 1V | ||
| AC Voltage | 60.00mV | ±1%±3 digit | 10uV |
| 600.0mV | 100uV | ||
| 6.000V | 1mV | ||
| 60.00V | 10mV | ||
| 600.0V | 100mV | ||
| DC Current | 60.00mA | ±1%±5 digit | 10uA |
| 600.0mA | ±1.5%±5 digit | 100uA | |
| 6.000A | 1mA | ||
| 10.00A | 10mA | ||
| AC Current | 60.00mA | ±1%±5 digit | 10uA |
| 600.0mA | ±1.5%±5 digit | 100uA | |
| 6.000A | 1mA | ||
| 10.00A | 10mA | ||
| Resistance | 600Ω | ±1%±3 digit | 0.1Ω |
| 6.000KΩ | 1Ω | ||
| 60.00KΩ | 10Ω | ||
| 600.0KΩ | 1KΩ | ||
| 6.000MΩ | 10KΩ | ||
| 60.00MΩ | ±1%±5 digit | 100KΩ | |
| Capacitance | 40.00nF | ±2%±5 digit | 10pF |
| 400.0nF | 100pF | ||
| 4.000uF | 1nF | ||
| 40.00uF | 10nF | ||
| 400.0uF | 100nF | ||
| Attention: the smallest capacitance value that can be measured in 5nF | |||
| Diode | 0V~2.0V | ||
| ON-OFF test | <10Ω | ||
Expédition:
Nous expédierons tous les articles dans un délai de 1 à 2 jours ouvrables après réception du paiement, notre objectif est le suivant: espérons que vous le recevrez dans les plus brefs délais.
Les droits d'importation et les taxes ne sont pas inclus dans le prix de l'article ou les frais d'expédition.Ces frais sont à la charge de l'acheteur.
Nous déclarerons la valeur requise par le client pour les petites taxes.
Politique de garantie et de retour:
Nous encourageons tous les clients à communiquer avec nous via les messages eBay.
Si vous avez des questions ou des commentaires concernant nos produits ou notre liste, nous attendons de vos nouvelles
Une garantie d'un an est offerte pour ce produit.Si le produit a mal fonctionné dans le cadre d'une utilisation conforme aux instructions
manuel pendant la période de garantie, veuillez nous contacter pour obtenir les instructions d'expédition et le renvoyer à vos frais d'expédition.
30 jours d'évaluation et d'enquête ont lieu après réception de votre article de retour.Une toute nouvelle unité de remplacement sera
vous être envoyé à nos frais d'expédition s'il répond à notre garantie