Tilt Wall Mount for most 26" to 47", some LED up to 55" with Mounting Holes Patterns Mounting Holes 400x400/400x200/200x200mm Flat Panel Screen Display
Package Contents:
- 1 x Tilting Arm Wall Mount
- Standard Mounting Hardware
- User Manual
Please check whether the mount is suitable for your TV:
- Find the 4 mounting holes on the back of your screen and measure the width and height. If the width is within 16", height within 16", then this bracket will fit.
- The weight of your TV or monitor should be less than 55 lbs
- Make sure your screen should be at least 17" wide and 17" high, otherwise you will see the bracket.
- Warning: This mount does not fit 40 inch or above TVs.
- Note: Please help check, if your shipping address is not valid for USPS, please also provide PO box.
 |
|
|---|
|
It fits following Samsung models as well as other brands, some displays may not be listed (please check Mounting Holes Patterns and Weight): |
| UN32EH4000F | UN32EH4003F | UN32EH4050F | UN32EH5000FXZA |
| UN32EH5300 | UN32EH5300F | UN32F5000AFXZA | UN32F5500AFXZA |
| UN32H6350AF | UN39EH5003F | UN39FH5000F | UN40EH5000F |
| UN40EH5300F | UN40F5000AF | UN40F5500AF | UN40F6350AF |
| UN40F6400AF | UN40H6350AF | UN46EH5000FXZA | UN46EH5300 |
| UN46EH5300F | UN46EH6000F | UN46F5000AF | UN46F5500AF |
| UN46F6300 | UN46F6350AF | UN46F6400AFXZA | UN46F6800AF |
| UN46F7500AF | UN46F8000BF | UN48H6300AF | UN48H6350AF |
| UN48H6400AFXZA | UN50EH5000F | UN50EH5300F | UN50EH6000F |
| UN50F5000AF | UN50F5500AF | UN50F6350AF | UN50F6400AF |
| UN50F6800AF | UN50H6300AF | UN50H6350AF | UN50H6400AF |
| UN55EH6000F | UN55EH6030F | UN55EH6070F | UN55ES6580F |
| UN55ES7003F | UN55F6300 | UN55F6350AF | UN55F6400AF |
| UN55F6800AF | UN55F7100AF | UN55F7450AFXZA | UN55F7500AF |
| UN55F8000BF | UN55FH6003F | UN55FH6030F | UN55FH6200F |
| UN55H6300AF | UN55H6350AF | UN55H6400AF | UN55H8000AF |
| UN55HU8550F | UN55HU9000F | UN60ES6100F | UN60ES7100F |
| UN60ES7150F | UN60ES7500F | UN60F7100AFXZA | UN60F7500AF |
| UN60F8000BF | PN43F4500AF | PN43F4550AF | PN51F5300AF |
| PN51E490B4F | PN51F4500AF | PN51F4550AF | LN46E550F6F |
| PN51F5350AF | PN51F5500AF | PN51F8500AF | LN40E550F7FXZA |
|
It fits following Vizio models as well as other brands, some displays may not be listed (please check Mounting Holes Patterns and Weight): |
| E280I-A1 | E280I-B1 | E291-A1 | E291i-A1 |
| D320-B1 | E320-A1 | E320-B0 | E320-B0E |
| E320-B1 | E320-B2 | E320FI-B2 | E320i-A0 |
| E320i-A2 | E320I-B0 | E320I-B1 | E320I-B2 |
| M321i-A2 | M321I-A2 | E370-A0 | E390-A1 |
| E390-B0 | E390-B1 | E390i-A1 | E390I-B0 |
| E390I-B1 | E400-B2 | E400I-B2 | M401i-A3 |
| E420-A0 | E420-B1 | E420d-A0 | E420i-A0 |
| E420i-A1 | E420I-B0 | E461-A1 | E470-A0 |
| E470i-A0 | M3D470KD | M3D470KDE | M471i-A2 |
| E480-B2 | E480I-B2 | E500D-A0 | E500i-A0 |
| E500i-A1 | E500I-A1 | E500I-B1 | M501d-A2R |
| E550i-A0 | E550i-A0E | E550I-B2 | E551i-A2 |
| M551d-A2R |
Features and Benefits:
- Heavy gauge steel mount offers loading capacity up to 55 lbs
- Tilt 10 degrees forward for optimal viewing angle adjustment
- Low profile design holds display about 2" from the wall for a low-profile application
- Quick release tabs allow for easy flat-panel removing
- New end caps cover locking provides a clean side view
- Build-in bubble level for easy installation
Specification:
- Fits: most 26 - 47 inch TV, some up to 55 inch TVs (Please check Mounting Holes Patterns and Weight)
- Mounting Holes Patterns mounting hole patterns: 400x400/400x300/300x300/400x200/200x200/300x200/200x100/100x100mm (16"x16"/16"x12"/12"x12"/16"x8"/8"x8"/12"x8"/8"x4"/4"x4")
- Supports: 55 lbs
- Tilt:10º forward
- Mounting profile: 2"
- Mounting studs: 16"
Shipping & Handling:
- Welcome to visit our store. Any problems please send us a message through the eBay messages system.
- Please make sure your shipping address is correct and current. We are not responsible for any package lost due to wrong or undeliverable addresses.
- We do not offer combine shipping discount.
