About this item
Art3d Easy DIY peel and stick backsplash tile/sticker is made of PVC composite laminate combined with a strong adhesive foam substrate. It's all constructed for easy processing, just peel and stick, cut with a utility knife. Because of the material's superior attribute, the tile is light, anti-scratch, stain, heat, and water-resistant. There are a variety of classic finishes range from natural wood to distressed wood to rustic wood to stone slate with impressive raised textures.
- Easy DIY, Just Peel & stick, cut with tin snip , utility knives or hand saws, saving large amount on labor.
- Distressed rustic wood textured tile, made of PVC composite laminate, real textures
- Waterproof, heat resistant, stain resistant, anti-scratch, high impact, color fadeless, easy to clean, durable
- Suitable surfaces: painted gypsum/dry wall, ceramic tile, linoleum, glass, marble/granite, metal/steel, sealed/polished/painted wood
- Unsuitable surfaces: brick wall, oily glossy painted wall, textured wall and any uneven rough surfaces. Do not use in shower area
Easy Do It Yourself
1. Wash the surface and grout lines with a powerful grease remover and wait for it to dry.
2. Measure and mark the self-adhesive backsplashtile.
3. If necessary, cut the peel and stick tiles by using a cutter or sharp scissors.
4. Now align and stick the Art3d Tiles at your own pace.
Kindly Remind
1.Tiles should not directly contact with flames, steam or submerse in water. Do not install tiles less than 16 inches away from the top of stove.
2.Rough surfaces such as porous wood, embossed ceramic tiles or textured wallpaper are not suitable to install.
3.The curing period is 2 days after you install them on your wall (21 days for the freshly painted walls).
4.The new arrived peel and stick wall tiles may have little gel smell. The smell will disappear in 2-3 days.
5.If you want to remove the tile, you could use a hair dryer to warm up the adhesive and pull softly starting with the corners.Then use a cleaning product to remove the excess glue left.
Notes:
1.The wall surface are all in aged paint with loosen debris which is definitely not recommended for direct application.
2.Please repair the wall by sanding the aged paint and applying a new coat of basic primer first.
3.And for corner application, it should be sharped by two separate tiles, please do not cover it with one whole sheet！
