LSI 9211-4i HBA with a 12-month Limited Warranty


Use:

For use with various software RAID configurations and NAS systems such as ZFS, btrfs, Linux mdraid, TrueNAS, unRAID, and Windows Disk Striping / Spanning. This HBA can be directly connected to up to 8 SATA or SAS drives using this cable for SATA drives or this cable for SAS drives. This HBA can be connected to more than 8 drives using a Backplane or SAS Expander using these cables.


Features:

  • Compatible with SATA or SAS drives
  • Supports up to 4 directly attached drives, and many more using backplane or SAS expander
  • 6Gbps link speed with SAS2 or SATA3 hardware
  • Supports SMART data pass through to the OS
  • LSI IT Mode firmware for drive passthrough to the OS
  • BIOS and UEFI modes
  • Boot from an attached drive

Condition:

  • Refurbished - Very Good Condition.
  • It has been cleaned and physically inspected.
  • It has had the latest LSI IT Mode Firmware, and BIOS and UEFI ROM flashed to it.
  • It has been tested using a disk array to ensure correct operation.
  • Securely packaged and ready for dispatch.

Warranty:

  • This product is covered by a 12-month limited warranty.
  • The warranty T&Cs will be emailed to the buyer after purchase or sent with the item when it is dispatched.

Notes:

  • This HBA doesn’t provide any Hardware RAID capabilities.

Specification:

  • Manufacturer: LSI
  • Model: 9211-4i
  • SAS Chipset: LSI SAS2008
  • Interface: PCI-e 2.0 x4
  • Ports: 1 x Internal Mini-SAS HD (SFF-8087) 
  • Supported Drives: SATA II, SATA III, SAS1 and SAS2
  • Max number of directly attached drives: 4
  • Max Bandwidth per drive: 6Gbps
  • Max Mini-SAS Bandwidth: 24Gbps (24Gbps per port)
  • Max PCI-e Bandwidth:  16Gbps

Comes with:

  • LSI 9211-4i HBA
  • Half-height bracket
  • Full-height bracket

Doesn’t come with:

  • Cables