433MHz Universal Wireless Remote Control DC6V 12V 24V 2CH rf Relay and 300M Transmitter Remote Garage/Gate/Motor/Light/Home Appliance

Relay Receiver Board Parameter

• Working voltage  :  DC 6V~30V
• Input/Output vlotage  :  1~250V
• Quiescent Current  :  <5MA
• Max current  :  10A
• Max load:   300W
• RF frequency  :  433MHz
• Pin  :  NO / COM / NC
• Working temperature  :  -30~+80
• Receiving Sensitivity  :  >97dbm
• Amount of storage remote controls  :  20 pieces
• Support encoding  :  1527 Leaning code /2262 fixed code
• RF Operating mode  :  ASK superheterodyne wireless reception
• Receiving range  :  Open space is more than 300 meters
• Remote operating mode   : Momentary Mode / Toggle Mode / Latched Mode 

Product Video On Youtube : https://youtu.be/CnasCqtFl_0 


Programming
The relay receiver board has 3 operation modes, you can program depend on your requests. (With this 3buttons remote,we suggest that you can use in latch mode)

- 1. Momentary Mode:
Description :  Press and hold on button, relay will turn on; Release this button, this relay will turn off.
Program : 
1. Press the learning button(on the Receiver) once. Wait for 3 seconds;
2. Press button "UP" on the remote control. Wait for 3 seconds.
3. Press button "DOWN" on the remote control. Wait for 3 seconds. Succeed.

- 2. Toggle Mode:
Description :  Press button, relay will turn on; Press same button again, this relay will turn off.
Program : 
1. Press the learning button(on the Receiver) twice. Wait for 3 seconds;
2. Press button "UP" on the remote control. Wait for 3 seconds.
3. Press button "DOWN" on the remote control. Wait for 3 seconds. Succeed.

- 3. Latched mode:
Description : Press UP button, relay "1" will turn on; Press button DOWN, relay "2" will turn on, at the same time relay "1" will turn off.
Program : 
1. Press the learning button(on the Receiver) triple. Wait for 3 seconds;
2. Press button "UP" on the remote control. Wait for 3 seconds.
3. Press button "DOWN" on the remote control. Wait for 3 seconds. Succeed.

Note:  Reset the receiver before you want to change the operating mode of one remote control.

Reset:
Press the learning button (on the Receiver) 8 times. The existing data will be deleted succeed.

Note:
1. After reset, all the remote controls cannot work any more.
2. Before using the relay receiver board, please stretch the antenna on it slightly to increase the signal reception range.

Product Application Area
Products can be used in homes, farms, factories, offices, laboratories, supermarkets and so on.
Remote control garage door \  Electric door \ house door \ shutter door \ expansion door \ gate door \ road gate
Remote control Electric curtain \ Water pump \ Fan \ Lamp \ LED light \ bulb \ ventilation device \ Signal transmission
Remote control motor positive and negative rotation \  motor switch \ DIY
If you have any questions, please feel free to contact us.

Package include
Relay Reciever Board (with shell)
Remote Control (with battery)
Product Manual

 
About shipping
We will ship the product out wthin 48 hours after you paid the order.

1.Learning button 2.Receive module 3.Antenna 4.Indicator light 5.Power port 6.Relay