eBay

The video tutorial

Video will open in a new window

433MHz Garage/Gate/Motor Controller Universal Wireless Remote Control Switch AC 110V 220V 2CH relay Receiver Module With RF Transmitter

What can it doProducts can be used in home, farm, factory, office, laboratory, supermarket and so on.
Remote control garage door \ Electric door \ house door \ shutter door \ expansion door \ gate door \ road gate
Remote control Electric curtain \ Water pump \ Fan \ Lamp \ LED light \ bulb \ ventilation device \ Signal transmission
Remote control motor positive and negative rotation \ motor switch \ DIY
If you have any questions, please feel free to contact us.

Working Modes:

You can set up in 3 modes: Momentary mode,Toggle mode and Latched mode.

Momentary mode:
Press and hold button,this relay will work;Release button,this relay will stop.
Toggle mode:
Press button,the relay will work;press button again,this relay will stop.
Latched mode:(3buttons remote are suggested in this mode)

Press A button,the relay will work;press C button,this relay will stop,second relay will work;press B button,both relay stop.
Mix mode(1st channel in momentary mode,2nd channel in toggle mode)

Press and hold A button,the 1st relay will work;Release A button,the 1st relay will stop;
press B button,the 2nd relay will work.press B again,the 2nd relay will stop.

How to set up:

Momentary mode:
Press learning button once,press A once,press B once,succeed.
Toggle mode:
Press learning button twice,press A once,press B once,succeed.
Latched mode:
Press learning button 3times,press A once,press C once,succeed.
Mix mode:
Press learning button 4times,press A once,press B once,succeed.

Clean data:
Press learning button 8times,the data will be cleaned.All remotes cannot control this receiver.
If u want to change modes,u need to clean the data first.

Note:
1. After reset, all the remote controls cannot work any more.
2. Before using the relay receiver board, please stretch the antenna on it slightly to increase the signal reception range.

Relay Receiver Board

--Working voltage : AC 85V~250V
--Quiescent Current : <5MA
--Max current : 10Amp
--Max load : 2200W
--RF frequency : 433MHz
--Pin : COM,NO,NC
--Working temperature : -30~+80
--Receiving Sensitivity : >97dbm
--Amount of storage remote controls : 20 pieces
--Support encoding : 1527 Leaning code /2262 fixed code
--RF Operating mode : ASK superheterodyne wireless reception
--Receiving range : Open space is more than 50 meters
--Remote operating mode : Momentary Mode / Toggle Mode / Latched Mode/Mix Mode

Transmitter

--RF frequency : 433MHz
--Support encoding : 1527 Leaning code
--Transmitting range : Open space is more than 50 meters
--Battery : 2pcs CR2016 ( include )
--Size : 60*30mm