Part of the Varilight screwless polished chrome range. The plate has a depth of 4mm and is supplied with chrome knobs.
Plate size: 86mm x 86mm (1 gang & 2 gang)
Plate size: 147mm x 86mm (3 gang & 4 gang)
This
listing is for dimmer plates (supplied with matching knobs) and dimmer modules.
If you just buy a plate it will be sent as pictured (there will no modules
fitted to it). Dimmer modules will need to be purchased separately.
Please note halogen dimmer modules cannot be used with LED bulbs.
The following dimmer modules can only be used on a 1 gang plate due to
their size:
MKP400
20-400W Vcom (max 40 bulbs) LED
MTP500 60-500W Vdim Halogen
MIP1000 100-1000W Vplus Halogen
MIP700 60-700W Vplus Halogen
MTR1000 200-1000W Rotary Halogen
DIMMER MODULE SPECS:
MJP120 0-120W Vpro (max 10 bulbs) LED:
Product
Description: 2-Way Push-on Push-off LED Replacement Dimmer Module Kit 1 x
0-120W (1-10 LEDs)
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Pro intelligent dimming technology. Soft
start feature and intelligent overload protection. Adjustable minimum
brightness setting and choice of driving modes.
Dimensions: 52x26x42mm
Product Weight (g): 50
V-Pro dimmers are set to run in trailing-edge mode (MODE 1) by default. This
versatile mode is suitable for most types of lighting recommended below. The
alternative trailing-edge mode (MODE 3) may improve the performance of some
dimmable LEDs. Some other lighting loads, including some types of LED, perform
best in Mode 2. This is a simulated leading edge mode (not TRIAC) which is
suitable for use with certain types of LED light.
Operating Voltage: 220/250V AC
Maximum Load Rating: LED; 120W (Max. 10 lamps)
Application Advice: Not suitable for use with non-dimmable fluorescent
bulbs and tubes, wire-wound or toroidal transformers, TRIAC dimmable loads or
electric motors.
Varilight Guarantee (years): 10
MTP250 40-250W Vdim Halogen:
Product Description: 2-Way Push-on Push-off Replacement Dimmer Module Kit
40-250W
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Dim dimming technology. Ideal for
incandescent lighting including mains and low voltage halogen.
Dimensions: 50x25x41mm
MKP180 15-180W Vcom (max 20 bulbs) LED:
Product Description: 2-Way Push-on Push-off LED Replacement Dimmer Module
Kit 1 x 15-180W (Max 20 LEDs)
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Com intelligent TRIAC leading edge dimming
technology. Soft start feature and intelligent overload protection. Suitable
for many dimmable LED lamps.
Dimensions: 53x28x42mm
MKP100 0-100W Vcom (max 10 bulbs) LED:
Product Description: 2-Way Push-On/Off Rotary LED Dimmer 0-100W (max 10
LEDs)
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Com intelligent TRIAC leading edge dimming
technology. Soft start feature and intelligent overload protection. Adjustable
minimum brightness setting and choice of driving modes to optimise the dimming
performance of a given LED lighting load.
Dimensions: 52x26x42mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: LED; 100W (Max. 10 LEDs)
Application Advice: Not suitable for use with non-dimmable fluorescent
bulbs and tubes, wire-wound or toroidal transformers or electric motors
Varilight Guarantee (years): 10
MTP402 60-400W Vdim Rotary Halogen:
Product Description: 2-Way Push-On/Off Rotary Dimmer 1 x 60-400W
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Dim dimming technology. Ideal for
incandescent lighting including mains and low voltage halogen . Overload
protection that automatically switches off the lights when an overload is
detected.
Dimensions: 53x28x43mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: Halogen; 400W
Application Advice: Not suitable for wire-wound low voltage transformers,
fluorescent lighting, motors or fans
Varilight Guarantee (years): 10
MIP400 40-400W Vplus Halogen:
Product Description: 2-Way Push-On/Off Rotary Dimmer 40-400W Replacement
Module Kit
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Plus intelligent dimming technology. Soft
start feature and intelligent overload protection.
Dimensions: 52x26x42mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: Halogen; 400W
Application Advice: Not suitable for motors or fans
Varilight Guarantee (years): 10
MIP302 40-300W Vplus Halogen:
Product Description: 2-Way Push-on Push-off Dimmer 1 x 40-300W
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Plus intelligent dimming technology. Soft
start feature and intelligent overload protection.
Dimensions: 52x26x42mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: Halogen; 300W
Application Advice: Not suitable for motors or fans
Varilight Guarantee (years): 10
MJP300 0-300W Vpro (max 30 bulbs) LED:
Product Description: 2-Way Push-On/Off Rotary LED Dimmer 0-300W (Max 30
LEDs) Replacement Module Kit
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Pro intelligent dimming technology. Soft
start feature and intelligent overload protection. Adjustable minimum
brightness setting and choice of driving modes . Suitable for many dimmable LED
lamps.
Dimensions: 52x26x42mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: LED; 300W (Max. 30 Lamps)
Application Advice: Not suitable for use with non-dimmable fluorescent
bulbs and tubes, wire-wound or toroidal transformers, TRIAC dimmable loads or
electric motors
Varilight Guarantee (years): 10
MTR250 40-250W Vdim Rotary Halogen:
Product Description: 1-Way Rotary Replacement Dimmer Module Kit 40-250W
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Dim dimming technology. Ideal for
incandescent lighting including mains and low voltage halogen. The dimmer is
rotary controlled (not push on/off), meaning to operate you rotate clockwise
and it will click on, then continue to rotate to increase brightness.
Dimensions: 53x25x38mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: Halogen; 250W
Application Advice: Not suitable for wire-wound low voltage transformers,
fluorescent lighting, motors or fans
Varilight Guarantee (years): 10
MTR402 60-400W Rotary Halogen:
Product Description: 1-Way Rotary Replacement Dimmer Module Kit 60-400W
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Dim dimming technology. Ideal for
incandescent lighting including mains and low voltage halogen . The dimmer is rotary
controlled (not push on/off), meaning to operate you rotate clockwise and it
will click on, then continue to rotate to increase brightness.
Dimensions: 52x27x42mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: Halogen; 400W
Application Advice: Not suitable for wire-wound low voltage transformers,
fluorescent lighting, motors or fans
Varilight Guarantee (years): 10
MH0 2 Way Dummy Dimmer:
Product Description: 2-Way Push-On/Off Switch Module (Dummy Dimmer) 6A
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. 1- or 2-way switching. Identical in
appearance to dimmer switch without dimming function. Push-on/off function
only.
Dimensions: 50x26x42mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: 6A
Application Advice: No dimming function
Varilight Guarantee (years): 10
MPINT Intermediate Dummy Dimmer:
Product Description: Intermediate Push-On/Off Switch Module (Dummy Dimmer)
6A
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. Intermediate (3-way) switching. Identical in
appearance to dimmer switch without dimming function. Push-on/off function
only.
Dimensions: 50x23x42mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: 6A
Application Advice: No dimming function
Varilight Guarantee (years): 10
MKP400 20-400W Vcom (max 40 bulbs) LED:
Product Description: 1-Gang 2-Way Push-On/Off Rotary LED Dimmer 1 x
20-400W (Max 40 LEDs) Replacement Module Kit
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Com intelligent TRIAC leading edge dimming
technology. Soft start feature and intelligent overload protection. Suitable
for many dimmable LED lamps.
Dimensions: 50x37x45mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: LED; 400W (Max. 40 LEDs)
Application Advice: Not suitable for use with non-dimmable fluorescent
bulbs and tubes, wire-wound or toroidal transformers or electric motors
Varilight Guarantee (years): 10
MTP500 60-500W Vdim Halogen:
Product Description: 2-Way Push-on Push-off Replacement Dimmer Module Kit
60-500W
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Dim dimming technology. Ideal for
incandescent lighting including mains and low voltage halogen.
Dimensions: 50x36x45mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: Halogen; 500W
Application Advice: Not suitable for wire-wound low voltage transformers,
fluorescent lighting, motors or fans
Varilight Guarantee (years): 10
MIP1000 100-1000W Vplus Halogen:
Product Description: 2-Way Push-on Push-off Replacement Dimmer Module Kit
100-1000W
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Plus intelligent dimming technology. Soft
start feature and intelligent overload protection.
Dimensions: 64x58x46mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: Halogen; 1000W
Application Advice: Not suitable for motors or fans
Varilight Guarantee (years): 10
MIP700 60-700W Vplus Halogen:
Product Description: 2-Way Push-on Push-off Replacement Dimmer Module Kit
60-700W
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Plus intelligent dimming technology. Soft
start feature and intelligent overload protection.
Dimensions: 64x58x46mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: Halogen; 700W
Application Advice: Not suitable for motors or fans
Varilight Guarantee (years): 10
MTR1000 200-1000W Rotary Halogen:
Product Category: V-Dim Module
Product Description: 1-Way Rotary Replacement Dimmer Module Kit 200-1000W
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Dim dimming technology. Ideal for
incandescent lighting including mains and low voltage halogen . The dimmer is
rotary controlled (not push on/off), meaning to operate you rotate clockwise
and it will click on, then continue to rotate to increase brightness.
Dimensions: 64x58x42mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: Halogen; 1000W
Application Advice: Not suitable for wire-wound low voltage transformers,
fluorescent lighting, motors or fans
Varilight Guarantee (years): 10