TORX PIN BUTTON HEAD SCREWS M5 X 16

COMPLETE WITH

TORX PIN BUTTON HEAD BARREL NUTS M5 X 10

YOU WILL RECEIVE THE FOLLOWING:

12 SCREWS +

12 BARREL NUTS +

2 DRIVE BITS IN CHROME VANADIUM CR-V STEEL

(ONLY 1 OF EACH PART SHOWN IN PHOTO FOR CLARITY)

STAINLESS STEEL GRADE A2

ANTI-TAMPER SECURITY 

6 LOBE STAR PIN

THESE ARE VERY HIGH QUALITY SCREWS & BARREL NUTS

THE FULL RANGE OF THESE IS AVAILABLE IN OUR eBAY SHOP.

THESE ARE DESIGNED TO SECURE AN

OVERALL THICKNESS OF 21mm

(THIS ALLOWS FOR A MINIMUM OF 5mm LENGTH OF

THREAD ENGAGING INSIDE THE BARREL NUT)

IF WASHERS ARE USED (NOT SUPPLIED) UNDER ONE OR BOTH HEADS OBVIOUSLY

YOU WILL BE ABLE TO USE ON THINNER MATERIALS.

ALSO REDUCING THE LENGTH OF SCREW WILL ALLOW THIS TOO.

TX25 PIN DRIVE BITS FOR BOTH THE SCREW AND NUT WILL BE SUPPLIED

TO DRIVE THESE.  

TX25 "L" SHAPE DRIVE KEYS ARE ALSO AVAILABLE IN OUR eBAY SHOP

STAINLESS STEEL WASHERS TO SUIT ARE AVAILABLE IN OUR eBAY SHOP

M5 ARE REQUIRED FOR THE SCREW &

M6 WOULD BE SUITABLE FOR THE BARREL NUT

PENNY WASHERS ARE ALSO AVAILABLE IN OUR eBAY SHOP

IF YOU NEED TO SPREAD THE LOAD

SQUARE SECTION SPRING WASHERS ALSO AVAILABLE

7mm DIAMETER CLEARANCE HOLE REQUIRED FOR BARREL NUT

PLEASE CONTACT US IF YOU REQUIRE ANY FURTHER INFORMATION

inoxca UK