Hydraulic control valve 2P40 1 A1 A1 GKZ + 2 pieces of RC cable + joystick + diverter switch 12V (24V possible) + 1x SIngle acting cylinder
SPECIFICATIONS
Joystick Indemar ID-6019
Control 2 compartment with one hand
+
Valve 2P40 1 A1 A1 GKZ1
- Maximum working pressure P = 4300 psi (300 bar); T = (50 bar); A, B = 4300 psi (300 bar)
- nominal flow rate 11 gpm (40 l / min)
- Centrally open (pump-to-tank flow)
- Adjustable pressure relief valve
- A, B connections 3/8 "BSPP (British Standard Parallel Pipe, not NPT)
- Connection P, T, N 1/2 "BSP
SOLENOID VALVE 6/2 FOR THIRD SECTION:
Maximum flow up to 50 l / min
Standard 12 VDC solenoid valve voltage (if you want to write 24 V to me)
Internal thread in the housing: BSP 1/2 "
Maximum pressure: 250bar
Two-position slide on the spring, ie it returns to the neutral position after the supply has been switched off
Current to coil. Functional principle of the solenoid valve:
Slide position 1 (the button on the joystick is not pressed) - control of cylinder 1.
Slider position 2 (the button on the joystick is pressed) - control of cylinder 2.
- All the coils are
Standard double-acting with spring return in neutral position
It is widely used in hydraulic systems in construction, agriculture and industry.
The set is adapted to different types of machines such as: agricultural machinery, tractors,
Field sprayers, tours, cyclops, HDS loaders, construction machinery, loaders, excavators, sweepers,
Industrial machines and other hydraulically controlled devices.
Ideal for controlling three sections per revolution, lifting the frame, tilted head and grapple
for bale or crocodile. In tractors where the hydraulic pump output does not exceed 40 l / min
GENERAL INFORMATION:
The main advantages of joystick control:
1. Very comfortable, convenient and precise control.
2. Safety mechanism with which the joystick head can be blocked.
3. Throw the manifold outside of the booth, which will stay clean with no oil leaking.
Joystick:
Adapted to control two sections in the manifold. Has an additional button and exit
Electrical wiring harness that enables the use of an electrovalve that provides additional control,
third section e.g. in the TUR loader with a crocodile or a bale grab.
Inner parts made of aluminum, housing made of strong plastic. Blocking the possibilities
Control via the safety button. NIMCO European production, 2 year guarantee.
LEFT:
Standard cable length: 2m (we will send it unless the customer specifies otherwise).
The possibility of changing the length of the lines to 1 m; 1.5 m; 2.5 m; 3m without changing the price of the set.
Thread on the distributor side: cable body M16x1.5, cable tie M6x1.5.
Joystick ball with a diameter of 14mm