Video demo link:
https://www.youtube.com/embed/-bUNkR4lZkQ


Descriptions:
1.DC drive cable can not only play the role of power adapter,while also serving to effectively suppress harmonic current noise.
2.High-quality chips,DC-DC converter,high conversion efficiency.
3.Good stability,can output high current,quiescent current is small.
4.DC drive cable connected power bank supply for digital cameras,power bank capacity: 8000-30000mAh,equal to the new battery in the camera's power many times;When you turn on the flash to take pictures or video,to provide uninterrupted power supply.
5.Using a wide range,suitable for all 7.2V-8.4V digital camera and video camera, Support part 9 v digital products
 

note:
1.In order to make your camera work better,please use a high-quality mobile power, mobile power bank is output guarantee of at 5V 2 AMP to 4 AMP current. When the power is not enough, will not start or can not shoot properly, Please select a larger current of at least 2.4A, DC 3 Amps or more is better.
2. If the mobile power supply has an auto sleep mode, turn it off.
3. Do not use the computer USB supply for the camera,because most computer USB 2.0 output voltage is 5V,But the current is less than 500mA.
4. Some mobile phone / tablet usb charger with identification resistance, can not identify the camera, the current can not meet the requirements, it is not recommended.

Features:
Input:5V 2-4A
Output:8.4V 2A
Conversion efficiency:87% (DC-DC Efficient conversion rate)
USB plug Specifications:USB2.0
length:105cm-110cm
drive8v tips
Some cameras require that the lid of the camera's battery compartment must be closed.After closing the lid, the camera can be turned on. For details, see the Manual illustration.
   
Cameras Models:
for Canon Elura 40mc
for Canon Elura 50
for Canon PowerShot S1 IS
for Canon PowerShot S2 IS
for Canon PowerShot S30
for Canon PowerShot S40
for Canon PowerShot S45
for Canon PowerShot S50
for Canon PowerShot S50 PRO
for Canon PowerShot S60
for Canon PowerShot S80
for Canon EOS 450D
for Canon EOS 500D
for Canon EOS 1000D 
for Canon EOS Kiss F
for Canon EOS Kiss X2
for Canon EOS Kiss X3
for Canon EOS Rebel T1i
for Canon Digital Rebel XS
for Canon Digital Rebel XSi
for Canon 450D Rebel XSi 
 

 

Package :

1  x  DC drive ACK-E5
1  x  DC coupler DR-E5


If you use “DC drive cable” and Power Bank:
    We notice a buyer feedback that, use our prodcuts can start his camera, but when shooting, the camera shut down. we'd like to explain here, we provide the the DC coupler and the USB cable adpater only. For this customer's case, proves our products can successfully connect the power, and the cable adapter successfully improves the voltage. But when shooting, the camera shut down, this the power source's problem.This situation,Please use a power source at least DC 5V 2.4A, DC 3A is better. To solve this problem, you just need to change a power source.
   Choose a quality power bank, there are too many power banks on the market. There are some mobile power parameters that mark the fake output, they don’t allow to draw higher current, when you shoot, it's bond to draws higher power than you start the camera, then the power bank stop supplying the power, then the camera shut down. We recommend: such as the Xiaomi 20000mAh version (not Xiaomi 2C ), which allows maximum DC output DC 5.1V 3.6A, or Xiaomi 10000mah Pro, Zmi 10 20000mah, CHOETECH 10400mAh (QC3.0) and other well-known and reliable brand. Recommended USB power port 5V-5.5V current 2.4A and above, 3A is better.
 
    Tips: General digital battery printed above parameters 7.2V / 7.4V labeled battery, it is the camera's minimum operating voltage, these batteries need to use 8.4V charger, full of power, charger 8.4V said no-load voltage, operating voltage and no-load voltage are two different concepts. External power used in the camera, You need to have enough power to supply, the camera is a load,the operating voltage is far lower than the no-load voltage.Therefore, the Camera adapter's no-load voltage is usually between 8V-9V (Note: the multimeter test is no-load voltage).



Warranty:


12 months
 

Shipping Info:

We Ship Worldwide& handling fees are posted in item description.
We use fast shipment with tracking number.Delivery time is 6-19 business days to U.S, Canada ,Britain, France, Germany, Australia, Russian federation, Ukraine,Spain,Japan.
International will take up to 30-40 Days. The Transit Time Might Fluctuate due to the Customs in each Country.


 
** WORLDWIDE SHIPPING **
Guarantee and Feedback:
All shipping & handling fees are posted in item description.
If you received an incorrect, damaged, defective or not as described, please always contact us first, we will do our best to resolve the issues you mentioned. We value our customers very much. Please give us the opportunity to help resolve your issues, in case you have concerns or problems with your order.


supremeauctiononlinesoftware.staticWidgets.templateBased