camera mobile power supply drive usb cable EH-5 EH-5A+EP-5F EP5F dc coupler ENEL24 EN-EL24 dummy battery for Nikon 1 J5 1J5



Descriptions:
1.DC drive cable can not only play the role of power adapter,while also serving to effectively suppress harmonic current noise.
2.High-quality chips,DC-DC converter,high conversion efficiency.
3.Good stability,can output high current,quiescent current is small.
4.DC drive cable connected power bank supply for digital cameras,power bank capacity: 8000-30000mAh,equal to the new battery in the camera's power many times;When you turn on the flash to take pictures or video,to provide uninterrupted power supply.
5.Using a wide range,suitable for all 7.2V-8.4V digital camera and video camera, Support part 9 v digital products.

 
note:
1.In order to make your camera work better,please use a high-quality mobile power, mobile power bank is output guarantee of at 5V 2 AMP to 4 AMP current. When the power is not enough, will not start or can not shoot properly, Please select a larger current of at least 2.4A, DC 3 Amps or more is better.
2. If the mobile power supply has an auto sleep mode, turn it off.
3. Do not use the computer USB supply for the camera,because most computer USB 2.0 output voltage is 5V,But the current is less than 500mA.
4. Some mobile phone / tablet usb charger with identification resistance, can not identify the camera, the current can not meet the requirements, it is not recommended.
 
dc drive cable Features:
Inptu:5V 2-4A
Output:8.4V 2A
Conversion efficiency:87% (DC-DC Efficient conversion rate)
USB plug Specifications:USB2.0
length:105cm-110cm
 
     vitesun DC drive cable,only coupled with a power bank,would can give the digital camera power supply, no need to bring the camera  grip or carry more   batteries, camera insert battery grip  will too heavy,is not conducive to taking pictures.


   
 
    When your digital camera does a heavy indoor job, or when you want to long time shooting, that far exceed your battery capacity, especially when you are outside without AC outlet, you much have our USB Cable Adapter kit, This DC cable adpater kit, can works with DC 5V 2A-4A usb power supply. Nowadays a DC 5V 2.4A, 5V 3A power bank is very popular, and easy to get, but it's not easy to find a DC 8.4V to 9V mobile power bank.so,with our coupler (dummy battery) and customized USB cable built-in intellgent circuit board, With a right power bank, this a ideal high-quality, low-cost solution, fits long time shooting outside.   
     So we provide this solution, with our coupler and customized USB cable built-in intellgent circuit board(improve DC output from 5V to approx 8.7V), you can connect this USB with DC 5V 2A power source. It's easy to find a DC 5V 2A power bank, and DC 5V 2A power bank is much cheaper than a DC 8.4V power bank.
(DC drive cable,customized production,strict inspection,High quality chip,efficient conversion rate.) 
Low input costs, Replace battery grip , suitable for indoor and outdoor.


   

Compatible with:
For Nikon 1 J5
 
NEW DRIVE8V+EP-5F (3)
 
Package :
1  x  USB drive cable EH5
1  x  DC Coupler EP-5F

If you use “DC drive cable” and Power Bank:
    We notice a buyer feedback that, use our prodcuts can start his camera, but when shooting, the camera shut down. we'd like to explain here, we provide the the DC coupler and the USB cable adpater only. For this customer's case, proves our products can successfully connect the power, and the cable adapter successfully improves the voltage. But when shooting, the camera shut down, this the power source's problem.This situation,Please use a power source at least DC 5V 2.4A, DC 3A is better. To solve this problem, you just need to change a power source.
   Choose a quality power bank, there are too many power banks on the market. There are some mobile power parameters that mark the fake output, they don’t allow to draw higher current, when you shoot, it's bond to draws higher power than you start the camera, then the power bank stop supplying the power, then the camera shut down. We recommend: such as the Xiaomi 20000mAh version (not Xiaomi 2C ), which allows maximum DC output DC 5.1V 3.6A, or Xiaomi 10000mah Pro, Zmi 10 20000mah, CHOETECH 10400mAh (QC3.0) and other well-known and reliable brand. Recommended USB power port 5V-5.5V current 2.4A and above, 3A is better.
 
    Tips: General digital battery printed above parameters 7.2V / 7.4V labeled battery, it is the camera's minimum operating voltage, these batteries need to use 8.4V charger, full of power, charger 8.4V said no-load voltage, operating voltage and no-load voltage are two different concepts. External power used in the camera, You need to have enough power to supply, the camera is a load,the operating voltage is far lower than the no-load voltage.Therefore, the Camera adapter's no-load voltage is usually between 8V-9V (Note: the multimeter test is no-load voltage).

 
Warranty:

12 months
 

Shipping Info:

We Ship Worldwide& handling fees are posted in item description.
We use fast shipment with tracking number.Delivery time is 6-19 business days to U.S, Canada ,Britain, France, Germany, Australia, Russian federation, Spain,Japan,Ukraine.
 International will take up to 30-40 Days. The Transit Time Might Fluctuate due to the Customs in each Country.


 
** WORLDWIDE SHIPPING **
Guarantee and Feedback:
All shipping & handling fees are posted in item description.
If you received an incorrect, damaged, defective or not as described, please always contact us first, we will do our best to resolve the issues you mentioned. We value our customers very much. Please give us the opportunity to help resolve your issues, in case you have concerns or problems with your order.

supremeauctiononlinesoftware.staticWidgets.templateBased