Video demo link:
https://www.youtube.com/embed/-bUNkR4lZkQ
Descriptions:
1.DC drive cable can't only play the role of power adapter,while also serving to effectively suppress harmonic current noise.
2.High-quality chips,DC-DC converter,high conversion efficiency.
3.Good stability,can output high current,quiescent current is small.
4.DC drive cable connected power bank supply for digital cameras,power bank capacity: 8000-30000mAh,equal to the new battery in the camera's power many times.When you turn on the flash to take pictures or video,to provide uninterrupted power supply.
5.Using a wide range,suitable for all 7.2V-8.4V digital camera and video camera.Support part 9V digital products
Replace the camera battery handle grip or carry more batteries,camera insert battery grip will too heavy,is not conducive to taking pictures.
Note:
1.In order to make your camera work better,please use a high-quality mobile power, mobile power bank is output guarantee of at 5V 2A to 4A current. When the power isn't enough, will not start or can't shoot properly, recommended that a separate USB power supply interface current is 2.4A, 3A will be better.
2.Turn off the smart sleep mode of the power bank and camera, or extend the camera standby time setting to unlimited.
3.Don't use the computer USB supply for the camera,because most computer USB 2.0 output voltage is 5V.But the current is less than 500mA.
4. Since the camera itself does not support the fast charging function, some USB ports with quick charging function can't start the quick charging mode of 5V 2.4A-3A, resulting in insufficient power supply.It's not recommended to use a mobile phone USB charger and multi-interface USB charger.
Input:5V 2-4A
Output:8.4V
Conversion efficiency:92% (DC-DC Efficient conversion rate)
USB plug Specifications:USB2.0
length:120cm-130cm (Can be customized)
Some cameras require that the lid of the camera's battery compartment must be closed.After closing the lid, the camera can be turned on. For details, see the Manual illustration.
Use our cable to connect with a DC 5V power source, you will get a power output around DC 8.4V.
So all you need to have: our cable, a power bank(DC 5V 2A), and a DC coupler(also called power supply connector or dummy battery/fake battery). Then you compose a long lasting power supply system.
Below are some application examples:
(1) Connect with DR-E5 DC coupler (Dummy LP-E5 battery),so fits for following Canon digital cameras:
EOS 450D 500D 1000D XS XSi T1i
(2) Connect with DR-E8 DC coupler (Dummy LP-E8 battery),so fits for following Canon digital cameras:
T2i T3i T4i T5i 550D 600D 650D 700D Kiss X4 X5 X6
(3) Connect with DR-E10 DC coupler (Dummy LP-E10 battery),so fits for following Canon digital cameras:
EOS 1100D 1200D 1300D Rebel T3
(4) Connect with DR-E12 DC coupler (Dummy LP-E12 battery),so fits for following Canon digital cameras:
FOR Canon EOS M and EOS M2 Cameras
(5) Connect with DR-E15 DC coupler (Dummy DR-E15 battery),so fits for following Canon digital cameras:
For Canon EOS Rebel SL1
For Canon SL1
For Canon EOS 100D
For Canon 100D
(6) Connect with DR-20 DC coupler (Dummy DR-20 battery),so fits for following Canon digital cameras:
For Canon Powershot G7
For Canon Powershot G9
For Canon Digital Rebel XT
For Canon Digital Rebel XTi
For Canon EOS-350D, EOS 350D
For Canon EOS-400D, EOS 400D
For Canon Powershot S40
For Canon Powershot S45
For Canon Powershot S50
For Canon Powershot S55
For Canon Powershot S60
For Canon Powershot S70
For Canon Powershot S80
and more models.
(7) Connect with DR-E50 DC coupler (Dummy DR-50 battery),so fits for following Canon digital cameras:
For Canon PowerShot G Series
For Canon PowerShot G10
For Canon PowerShot G11
For Canon PowerShot G12
For Canon PowerShot SX Series
For Canon PowerShot SX30 IS SX30IS
(8) Connect with DR-80 DC coupler (Dummy DR-80 battery),so fits for following Canon digital cameras:
For Canon Powershot SX40 HS
For Canon SX40
For Canon SX40 HS SX40HS
For Canon Powershot SX50 HS
For Canon SX50
For Canon SX50 HS SX50HS
For Canon Powershot SX60 HS
For Canon SX60
For Canon SX60 HS SX60HS
For Canon Powershot G1 X
For Canon G1
For Canon G1 X G1X
For Canon Powershot G15
For Canon G15 G15
For Canon Powershot G16
For Canon G16 G16
You can use our this cable to fit more machines or devices, any other accessory requirments please feel free to contact us.
Package :
1 x DC drive cable CA-PS700 (3.0mm*1.1mm)
When you want to long time shooting outside without AC outlet, then you'll feel it's not convenient. Also you can use with a DC 8.4V power bank, but it's not easy to find a DC 8.4V power bank, and it's expensiver.
So we provide this solution, with our coupler and customized USB cable built-in intellgent circuit board(improve DC output from 5V to approx 8.7V), you can connect this USB with DC 5V 2A power source. It's easy to find a DC 5V 2A power bank, and DC 5V 2A power bank is much cheaper than a DC 8.4V power bank.
(DC drive cable,customized production,strict inspection,High quality chip,efficient conversion rate.)
Low input costs, Replace battery grip , suitable for indoor and outdoor.
By the way, we notice a buyer feedback that, use our prodcuts can start his camera, but when shooting, the camera shut down. we'd like to explain here, we provide the the DC coupler and the USB cable adpater only. For this customer's case, proves our products can successfully connect the power, and the cable adapter successfully improves the voltage. But when shooting, the camera shut down, this the power source's problem. Please use a power source at least DC 5V 2.4A, DC 3A is better. To solve this problem, you just need to change a power source.
And If you use a power bank, please choose a high quality power bank, there are too many power bank in the market. A lots of power bank mark the fake output, they do not allow to draw higher current, when you shoot, it's bond to draws higher power than you start the camera, then the power bank stop supplying the power, then the camera shut down. Such as Xiaomi 20000mAh version, it allows Max DC output DC 5.1V 3.6A, The xiaomi 20000mah mobile power bank can also support continuous output.because some mobile power, when the camera sleep, the demand current is less than 100ma, mobile power mistakenly believe that there is no external device, automatic power off output.
And If you use a power bank, please choose a high quality power bank, there are too many power bank in the market. A lots of power bank mark the fake output, they do not allow to draw higher current, when you shoot, it's bond to draws higher power than you start the camera, then the power bank stop supplying the power, then the camera shut down. Such as Xiaomi 20000mAh version, it allows Max DC output DC 5.1V 3.6A, The xiaomi 20000mah mobile power bank can also support continuous output.because some mobile power, when the camera sleep, the demand current is less than 100ma, mobile power mistakenly believe that there is no external device, automatic power off output.
Warranty:
12 months
Shipping Info:
We Ship Worldwide& handling fees are posted in item description.
We use fast shipment with tracking number.Delivery time is 6-19 business days to U.S, Canada ,Britain, France, Germany, Australia, Russian federation, Ukraine, Israel,Spain,Japan.
International will take up to 30-40 Days. The Transit Time Might Fluctuate due to the Customs in each Country.
** WORLDWIDE SHIPPING **
Guarantee and Feedback:
All shipping & handling fees are posted in item description.
If you received an incorrect, damaged, defective or not as described, please always contact us first, we will do our best to resolve the issues you mentioned. We value our customers very much. Please give us the opportunity to help resolve your issues, in case you have concerns or problems with your order.
