Art3d Peel and Stick Backsplash 14x12 Subway Tiles Faux Ceramic Tiles
About this item
- THICKER VERSION - The Art3d upgraded version tile is 2-3 times thicker than ordinary peel & stick tile, 2mm-2.5mm each,
durable and solid tile, unlike soft sticker tiles
- STRONGER ADHESIVE - The Art3d upgraded version tile is 3X stronger backing glue than ordinary vinyl backsplash tile,
not only stick firmly to the smooth & clean surface but also available on lightly textured wall
- BIGGER SIZE - The size of the tile is 14"x12", which covers 60% more area than a 10"x10" tile does
- WATERPROOF & HEAT RESISTANT - Widely used in kitchen backsplash, kitchen island walls, bathroom backsplash,
shower, fireplace, and installed behind the stove
- EASY DO IT YOURSELF - Just peel, interlock and stick. No need to overlap,
no grout, no glue, no mess, no special tools and no experience needed.
Easy Do It Yourself
1. Wash the surface and grout lines with a powerful grease remover and wait for it to dry.
2. Measure and mark the self-adhesive backsplash tile.
3. If necessary, cut the peel and stick tiles by using a cutter or sharp scissors.
4. Now align and stick the Art3d Tiles at your own pace.
Kindly Remind
1.Tiles should not directly contact with flames, steam or submerse in water. Do not install tiles less than 16 inches away from the top of stove.
2.Rough surfaces such as porous wood, embossed ceramic tiles or textured wallpaper are not suitable to install.
3.The curing period is 2 days after you install them on your wall (21 days for the freshly painted walls).
4.The new arrived peel and stick wall tiles may have little gel smell. The smell will disappear in 2-3 days.
5.If you want to remove the tile, you could use a hair dryer to warm up the adhesive and pull softly starting with the corners.Then use a cleaning product to remove the excess glue left.
Notes:
1.The wall surface are all in aged paint with loosen debris which is definitely not recommended for direct application.
2.Please repair the wall by sanding the aged paint and applying a new coat of basic primer first.
3.And for corner application, it should be sharped by two separate tiles, please do not cover it with one whole sheet！
