100X Tile Leveling System Reusable Flat Ceramic Locator Spacer Lock Tools Kit US
100X Tile Leveling System Reusable Flat Ceramic Locator Spacer Lock Tools Kit US
100% Brand New & Excellent quality
Free & fast shipping, with tracking number provided
Free & fast shipping, with tracking number provided
Feature:
* Avoiding movements:Professional tool makes sure flatness between tiles during the mortar setting.
* Good quality :Made of high quality plastic and stainless steel which is wear-resistant and better hardness than 304 steel.
* Avoiding movements:Professional tool makes sure flatness between tiles during the mortar setting.
* Good quality :Made of high quality plastic and stainless steel which is wear-resistant and better hardness than 304 steel.
* Reusable T-Pins: Suit for the tile gap is 1.5 mm. These tile levelers are made of high quality stainless steel pins, which are very durable and not easy curved.
* Reusable & Money-saving
* Widely use :For Building ,Walls and Floors.
* Easily installed:
* Reusable & Money-saving
* Widely use :For Building ,Walls and Floors.
* Easily installed:
1.Lay the first piece of brick, seam ≥2mm or above, and close to second bricks, Insert the T-pin along the crack.
2.Insert the T-needle along the crack, then rotate it to 90 degrees.
3.Tighten the adjusting cover so that the two bricks are in the same level.
4.Wait about 4-5 hours after leveling.
5.Before the cement or tile glue has completely dried up(usually no more than 6 hours), tighten the adjusting cover in the opposite direction, then rotate the T-pin 90 degrees so that the T-pin turns to a zigzag parallel to the tile.
6.Remove the leveler, clean and dry storage for reuse.
Specification:
Size:orange Spacers :2.8*7.8cm/1.1”*3.07”, black bottom:3.7*2.3cm/1.46”*0.9”
Steel Pins:1*0.15cm/0.39”*0.059”
Special Wrenches:15.5*3.4cm/6.1”*1.34”
Color: Black and Orange
Package included:
50pcs x Tile Spacers
50pcs x Steel Pins
1 x Special Wrenches
2.Insert the T-needle along the crack, then rotate it to 90 degrees.
3.Tighten the adjusting cover so that the two bricks are in the same level.
4.Wait about 4-5 hours after leveling.
5.Before the cement or tile glue has completely dried up(usually no more than 6 hours), tighten the adjusting cover in the opposite direction, then rotate the T-pin 90 degrees so that the T-pin turns to a zigzag parallel to the tile.
6.Remove the leveler, clean and dry storage for reuse.
Specification:
Size:orange Spacers :2.8*7.8cm/1.1”*3.07”, black bottom:3.7*2.3cm/1.46”*0.9”
Steel Pins:1*0.15cm/0.39”*0.059”
Special Wrenches:15.5*3.4cm/6.1”*1.34”
Color: Black and Orange
Package included:
50pcs x Tile Spacers
50pcs x Steel Pins
1 x Special Wrenches
