This is one pair of headlights.
THIS IS A LISTING FOR TOYOTAS. THIS COMES WITH A PAIR OF CANBUS LOAD MODULES TO MAKE THE LIGHTS COMPATIBLE WITH YOUR TRITON.
These headlights are designed to fit any car with single rectangular lights on each side. If your car has twin headlights on each side, see our 4x6 headlights. These are our official JTX 5″x7″ (sometimes referred to as 6″x7″) ADR approved LED lights.
This model has chrome face with a white halo which can be made purple at the flick of a switch.
- The DRL Halo is really bright even in full sun light and it goes all the way around the light – not just up the sides.
- The light output is amazing. In High Beam mode the low beam is also on – this is a setting within the light to ensure maximum brightness in high beam.
- They are indestructible and waterproof
- You get ADR certification and according to Qld Dept Transport they are the only ADR approved LED light
- They are made by us here in Melbourne. Always consider buying Australian Made
These are 5″x7″ rectangular headlights and they theoretically fit any vehicle with single rectangular lights (2 lights in total) such as Hilux or Jeep Cherokee. They are made to suit Australian left side of road so popular in old cars being brought to Australia and both lights are identical so no left or right side lights.
Our customers give a 12 out of 10 for low beam because it's well beyond their expectations
High beams rivals spot lights and way better than standard high beam
All of our JTX LED headlights are plug and play using your regular 3 pin H4 socket. Only if you have a Toyota, Datsun or Suzuki you will need our Smart JTX CANBUS load modules which solve the negative switching, reverse polarity as well as spotties and blue dash light not working. Make sure you guys buy one of our Toyota, Datsun or Suzuki listings so we know about your wiring needs and it's plug and play for everyone. All other cars dont need this.
Wiring up the Day Running Lights is very easy. They get their earth through the 3 pin H4 headlight socket. The red wire is to power the primary DRL colour. So wire that to the parkers or to a power source that comes on with the ignition. The yellow wire powers the secondary colour which is typically amber in which case connect to indicator or to a separate switch if you have a twin colour set up like red and white.
JTX LED lights are made by us here in Melbourne. We carry all the components to make up all colour combinations. We make them up and send next day or even same day if we know soon enough. We are the only manufacturer of LED headlights in Australia. And in addition to our ADR approval the QLD Dept of Transport also need to discuss technical specifications with the manufacturer (and not the importer) and because they dont call China, then by default we become the only LED lights approved for QLD - please consider supporting Australian businesses.
These are 5x7" rectangular headlights and they fit all singular rectangular applications such as Toyota Hilux and Toyota Supra A70. Also a lot of trucks and vans have 5x7 lights, such as the F250 and they were popular in a lot of cars in the 70's and 80's. They are made to suit Australian left side of road so popular in old cars being brought to Australia and both lights are identical so no left or right side lights.
These are unbreakable. They come with a lifetime warranty and we will replace a light even if it is damaged in a collision. You cant even break them with a hammer.
They have breathers so as to avoid fogging or condensation and we have a breather kit option (just like diff breathers) for the serious off roader likely to do bonnet depth creek crossings. JTX are the preferred light chosen by the off road racing guys.
These suit Australian left side of road and satisfy the requirements of ADR 00/13. In fact they have the ADR ref stamped on the lens and come with an ADR compliance statement. We have demonstrated the manufacturing process, the Lumens of the chips etc to Police and state level departments of transport. Our JTX lights do not need to be self cleaning or self levelling to comply with ADR 00/13. We are presently undertaking specific lab testing for approval certification process to be extra sure.
Be aware there are plenty of cheaper alternatives out there which simply dont stack up. Most cheap lights fade or get a weathered yellow appearance after a year or so, they fog or fill up with water and they dont address the negative switching, polarity or blue dash light issues either. They wont be ADR compliant even by virtue that they are not made in Aus so authorities wont seek technical discussions with the overseas manufacturer. Even if the company professes to be Australian they still dont make the lights. Note that LED globes mounted in a conventional light is not ADR and the light must be made for LED built with in its entirity like these. Also lights with a series with rows of LED do not manage low beam well enough to be ADR compliant unlike these that manage low beam perfectly. And being made here in Aus you get the best back up support and warranty.
Halo flashes Amber ..... The following lights have Amber as their secondary color. Optionally connect the yellow wire to the indicator on each side and the halo will flash amber with your indicators.
RGB HALO ..... The following lights have an RGB rainbow halo which is controlled via a remote.
Black Faceplate
RGB Halo.
Note that the halo on this light is not legal on the roads. The hi and low beams are legal but to remain legal on the road the halo must be off.
JTX57RGB
$609.50
White and Colour Halo - The following lights have have a white DRL halo which can be turned to a set colour at the flick of a switch. (The colour is built into the halo and can not be changed. These lights to do not flash amber.
Non-halo ..... The following lights have no halo, this is a cheaper alternative to the other lights if you're just looking for a plug and play upgrade.
About Us - JTX Lighting is an Australian family business and have been long time specialists in lighting products for cars, trucks, 4WD's and bikes. Whether you need to just replace a blown globe, want brighter lights, upgrading spotties with insanely bright HID or out to enhance the look of your ride JTX Lighting can rescue the night.
We are on the web and facebook as well as here on eBay.
When Steve is not making cool lights he's either building air suspension kits (Air Assist Suspension) for utes and commercial vehicles or running Cliffhanger which is Austrlaia's biggest week long offroad event . Hence his connection with all the offroad guys and them running JTX lights.
Call us on 1300133961 and explain your situation and he can give you an expert opinion on what looks good or will work the best.
Returns
Shipping
If you ordered the wrong size or type then we will swap it over - it's not a problem.
If you are not 100% satisfied with your purchase then just send it back for a refund or replacement - it's not a problem.
You have 30 days from purchase for a change of mind return or exchange request.
All of our items have a 12 month Warranty which covers replacement parts. Send the old part back to us for testing and we repair or replace it. We can make sure you send the right part back by asking you to do a few simple tests. Contact us by ebay message or call us on 1300133961 to make such arrangements.
For a lot of our products we actually make or assemble them right here in our Melbourne facility so we would have the parts and technical skill to make sure you are totally looked after.
Your order will typically be dispatched on the same or next working day of your purchase.
We use regular Aus Post with tracking.
EXPRESS - When you check out you may upgrade to Aus Post Express which costs just a bit more.
All of our stock is here in Australia and ready to send to you straight away.
In the very unlikely event that your item is lost or damaged during post then WE are responsible and will make sure a replacement is sent.
Buy with confidence from JTX Lighting knowing your goods will be in your hands within a matter of days.
The JTX Lighting Guarantee
We are based in Melbourne and all of our stock is here in Melbourne. You are not waiting for postage from China with a company pretending to be in Australia. So you will get your goods within a matter of days.
We can handle all your after sales support needs, guarantee the parts fit and will fix or replace them under warranty, all from Melbourne and again within days.