Includes one package of 2 (TWO) new Genuine belts Bissell part number 32074. Made in USA. 

Fits ALL Bissell models using styles: 7, 9, 10, 12 & 16

Fits the following Bissell Models and model numbers:

MOMENTUM BAGLESS UPRIGHT SERIES 3910, 6390, 82G7

Momentum Cyclonic 39102, 39103, 39105, 3910F, 3910H, 3910R, 6390W

POWERFORCE, Powerforce Bagless, Powerforce Turbo Bagless, PowerGlide, Powertrak

3522, 3522-1, 3522-4, 3522-5, 3522-6 3545, 3545-1, 3545-2, 3545-3, 3545-5, 3545-Q, 6584, 6585, 6583, 6594, 6579, 6596, 6592

CLEANVIEW, Revolution, Helix, Powertrak Revolution, Cleanview ll, Cleanview Powertrak

3575, 3575-5, 3575-8, 3575-M, 3575-Z, 3590, 3590-1, 3591, 3593, 3593-1, 3593-z, 3594, 6590, 8975, 8990, 35951, 3595H, 35961, 6591, 65914, 21K3, 22C1, 20Q9, 82H1, 3595, 3596, 6591, 3574, 3576, 8975, 8990, 6590 Series

Velocity Total Floors 3990, 6393

Rewind Smartclean / Powerclean / Power Helix: 58F8, 8469, 18M9

Rewind Series:  Rewind Premier Pet / Rewind Premium Pet / Rewind Power Helix / Rewind Smartclean / Rewind PowerClean 44M3, 67F8, 84G9, 58F8, 18M9, 26T5 Series

Powertrak Revolution 6591, 14911, 3593F, 3593G, 3593J, 3594, 6390, 6591X, 6592, 6592X

 

 

If you are unsure if this belt will fit your vacuum message us

NOTE: These belts will be likely shorter than the belt you took off your vacuum. Belts lose elasticity from being stretched to almost twice their original length. After a few months the belt will be an inch or so longer. 
Be sure your brush roll will spin freely before installing your new belt. Also make sure the belt is not pinched or restricted before you turn the vacuum on by turning the brush roll by hand before you plug the vacuum in. If your belt is restricted from spinning freely the motor shaft will melt through your new belt. This leads many people to think they received a defective belt, it usually means the belt was installed improperly or the brush roll is not spinning freely as it should. Please ask if you have any questions.