DIGITAL FAN GAUGE SWITCH & 1/4" NPT SENSOR
& INLINE ADAPTER KIT
(PART #0500 + #0465 + #0409)
This kit comes with two sensors to enable various fitment options:
Sensor 1: Temperature Probe (Air or Coolant Fitment)
Sensor 2: ¼ NPT Thermal Sensor (Coolant Fitment Only)
Sensor 2: The Thermal Sensor can be placed into the thermostat housing, engine block, or directly into the radiator. If you would like to install this sensor in the top radiator hose, It can also be used with Temperature Sensor Adapter Kit (Part 0409)
A bright, attractive, compact high visibility 52mm round gauge with LED digital display for mounting in the driver’s compartment!
Automatically activates single or twin fans or a fan and Electric Water Pump at your set / targeted temperature when extra cooling is required. It can also detect transmission fluid temperature.
It senses air temperature as it passes through the radiator with the sensor placed in the radiator fin section or alternatively the sensor can also be placed directly into the coolant system.
24 Volt Application
Kit sold in 12-volt configuration, for 24-volt application, you will need to purchase 2 x 24-volt relays.
Simply search for part 10534 in our store.
KIT CONTENTS | |
DESCRIPTION | UNITS |
Digital Thermatic Fan Switch - 52mm Gauge | 1 |
Digital Gauge Stand | 1 |
Wiring Loom with Temperature Probe | 1 |
¼ NPT Thermal Sensor | 1 |
¼" NPT Thermal Sensor Adapter Kit | 1 |
Fan Wiring Harness | 2 |
Fuse 15 AMP | 2 |
Fuse 30 AMP | 2 |
Red Wire Joiner | 2 |
Blue Wire Joiner | 2 |
Relay - 12V 40 Amp 5 Pin | 2 |
Blue 6mm Ring Terminal | 2 |
Red 6mm Ring Terminal | 3 |
Screw - Self Tapping 8X3/8 | 3 |
Temperature Probe Mounting Kit | 1 |
Installation Instructions | 1 |
Using the Temperature Probe, it senses air temperature as it passes through the radiator and has an adjustable temperature range of 5ºC to 110ºC (41ºF to 230ºF).
The Temperature Probe is placed in the radiator fin section as close to the hot coolant inlet as possible, no need to cut hoses or can be placed directly into the coolant system.
WATER / COOLANT APPLICATION
Both sensors in the kit can also be placed directly into the coolant system.
The DIGITAL GAUGE THERMATIC® FAN/EWP® SWITCH must be mounted inside the vehicle’s driving compartment for easy reading and quick adjustment.
This new DIGITAL GAUGE THERMATIC® FAN/EWP® SWITCH complements the highly successful #0400 Combo, #0401, #0404, #0444 & 0445 Thermatic® Switches
FEATURES