5 Litre & 20 litre Acrylic Roof Paint
USES :
Suitable for only:
Roofing tiles, brick, concrete, asbestos, and timber after suitable preparation. (not for felt roofs)
PREPARATION : surfaces should be sound, dry and free from oil, wax and grease. Remove any loose, powdery or flaking material. Surfaces, which are contaminated with lichen or moss, should be brushed clean and washed with a Fungicidal Wash and allowed to dry thoroughly before coating. Any structural repairs that may be necessary should be carried out before applying Blue House flex roof paint.
Blue House Flex Roof Coating. A flexible and elastomeric coating, quickly applied by brush, roller or spray which dries to form a high build, seamless waterproof membrane. Economically prevents or cures all types of leaking roofs, gutters and walls. Easy to apply, Blue House flex roof paint remains flexible and elastic to allow for movement of the substrate forming a long-life protective coating for weatherproofing roofs and walls.
Application: DO NOT APPLY WHEN THE AIR TEMPERATURE IS BELOW 10 CENTIGRADE. If repair involves only
small-localised cracks or fractures, apply two full coats of Blue House flex over the treatment previously outlined. Where the complete
roof surface is to be weatherproofed, after necessary preparation as outlined, apply two full coats of Blue House flex, allowing thorough
drying between each coat.
Coverage: It is very important that Blue House flex weatherproofing system should be applied to the correct film thickness. The
spreading rate of 2 sq. metres per litre per coat should not be exceeded.
Drying: Normally dry in approximately 4-6 hours.
Flash Point: Not applicable - water based.
Clean up: Warm soapy water. Clean tools and equipment with water immediately after use.
Storage: Keep out of reach of children. Protect from frost.
When ordering the Roof Paint, please order enough as BATCHES may vary when re ordering
the colours shown are rough guide so their may also vary in shade.
If your going to order a second tin, the paint are in batches, so please message me the batch number(which is on the top on the lid) so the second tin you will receive will be out of the same batch
Please test the paint on the surface first.