Package: Kicker 45KM102 10" 350W Peak/175W RMS Marine Subwoofer SVC 2-Ohm + Kicker 45KMG10C 10" Charcoal Grille w/LED For KM10 + KMF10 Subwoofer + Hifonics TPS-A500.1 500 Watt Mono Amplifier for Polaris RZR, ATV, UTV, and Cart
Click Thumbnails to Enlarge
Condition: BRAND NEW IN ORIGINAL PACKAGING
Warranty: 1 YEAR MANUFACTURER
New Page 4
Package Includes:
- (1) Kicker 45KM102 10" 350w Peak/175w RMS Marine Boat Subwoofer SVC 2-ohm Sub KM10
- (1) Kicker 45KMG10C 10" Charcoal Grille w/LED For KM10 + KMF10 Subwoofer Subs KMG10C
- (1) Hifonics TPS-A500.1 500w Mono Marine Sub Amplifier For Polaris RZR/ATV/UTV/Cart
Authorized Kicker Dealer!
What's In The Box:
- (1) 10" Woofer
- (1) Back Gasket
- (8) Mounting Screws
- (8) Mounting Screw Clips
- (1) Owner’s Manual
Description of 45KM102:
The KICKER® KM 10-inch Marine
Subwoofer is made to work perfectly in a sealed or ported enclosure. Packed with
features and made for marine, KICKER gives you the deep, loud bass your boat
needs with KM subs.
Features:
- KICKER 45KM102 10" 350w Peak/175w RMS Marine
Subwoofer SVC 2-Ohm
- RMS Power Handling: 175 Watts
- Peak Power Handling: 350 Watts
- Two-Ohm Voice Coil
- Injection-Molded Polypropylene Cone
- Co-molded Santoprene® Surround
- UniPlate™ Back Plate And Pole Piece
- Thick Tinsel Leads
- Large Ceramic Magnet
- Rear Gasket Included
- Polymer Basket Resists Corrosion
- Protective Terminal Cap
- Stainless Mounting Hardware Included
- Meets or Exceeds ASTM Standards for UV and Salt/Fog
Exposure
- Frequency Response: 30 Hz - 500 Hz
- Impedance: 2 Ohms
- Mounting Depth: 5" inches
- Hole Diameter: 9 3/16"
- Sealed Enclosure Volume Min-Max: 1-2.4 cubic feet
What's In The Box:
- (1) 10" Charcoal Subwoofer Grille
- (1) Owner's Manual
Description of 45KMG10C:
Perfect for KM or KMF 10-inch
Subwoofer, these LED-equipped grilles are molded from thick ABS plastic. Perfect
for fresh and salt water, these waterproof grilles provide years of protection
for your bass, while thick silicone-coated LEDs give your boat an added flair!
Add the KMLC LED Controller (sold separately) for 20 total colors and 19
different lighting modes to make it even more fun!
Customize your LED lighting
to get the perfect look for your boat. The KMLC remote provides multi-function
control of LED lighting by managing 20 different colors and 19 dynamic modes,
including adjustable brightness, fade, speed/strobe and auto save.
Features:
- KICKER 45KMG10C 10" Charcoal Grille w/LED For KM10 +
KMF10 Subwoofer
- Made of thick ABS Plastic
- Charcoal Color
- Optional LED Remote
- Silicone-Coated LED Lights
Description of TPS-A500.1:
Hifonics THOR compact 500 watt mono Powersports amplifier to for a subwoofer with on-board equalization and simple instalation with quick release connectors.
Features:
- Hifonics TPS-A500.1 500w Mono Marine Sub Amplifier For Polaris RZR/ATV/UTV/Cart
- Marine Grade Protection: YES - Amplifiers are ABYC & ASTM certified which defines that marine amplifiers must use conformal coated PC boards to resist corrosion from salt spray & moisture.
- Pre-Amp Circuitry: Low Noise Pre-Amplifier Stage - Special preamplifier reduces incoming noise from source units dramatically improving sound quality
- Inputs: 1 Pair, RCA Nickel-Plated - High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
- Operation Mode: Mono operation - Designed to power 1 subwoofer or subwoofer system
- Crossover / Signal Shaping: LPF - Complete control of amplifier signal, essential when using two or more amplifiers
- Class / Topology: Full Range Class D - Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink.
- Output Devices Technology: PWM MOSFET Power Supply - Stable power through the PC board with minimal heat generation
- Heat Sink: Aluminum - Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration
- Power Supply: Simpatico Coil Design - The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices
- Output Connections: Quick Dissconect Wires, RCA Connections - Quickly remove amplifer when you are putting machine up for the winter of as a security precaution
- Connections Type: Gold-plated connections - Gold-plated power, ground, speaker and RCA corrosion resistant connections
- Diagnostics: Three-stage protection circuits - Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
- Marinized / Waterproof: YES - Water resistant for durability in any environment
Specifications:
- Class: Full Range Class D
- Variable Voltage: 0.2V~9V
- Signal to Noise Ratio: >100dB
- Frequency Response: 10Hz-300Hz
- Crossover Type: Electronic 12dB Per Octave
- Crossover Frequency Range CH1 & CH2: Switch Low Pass 300 Hz
- Bass Boost: 0-12dB@45Hz
- Subsonic Filter: 60Hz
- Power @ 2-Ohms: 1 x 500W
- Power @ 4-Ohms: 1 x 250W
- Total Channels: Mono
- Audio Inputs: RCA
- Power Terminal 12v/GND: Molex 10 ga
- Speaker Terminal Wire Gauge: Molex Plug Connector
- Fusing: 1 x 30 Amps
- Certifications: Marine & Powersports
- Dimensions: 3.70 X 5.51 X 1.77 inches (9.4 X 14.0 X 4.5 cm)
- Weight: 2.09 lbs (0.95 kg)
AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer
satisfaction and therefore offer free return shipping within 30 days of purchase
on all items returned to us within the continental USA.
Prior to returning merchandise, contact us and we will give
you a return authorization # and a return label.
You may return this item for a refund within 30 DAYS of purchase.
Warranty Repair/Exchange Period: 1 YEAR
If your item is defective or you want to return it for any
reason within the first 30 days of when it was delivered to you; you have the
following options:
- We will send you a pre-paid shipping label to replace the item for a brand new one.
- We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
- If you are returning a working item in used condition for a refund there will be a
20% used item fee deducted from your refund. All replacements and exchanges are
free.
Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.
Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.
You MUST notify us within 48 hours if you receive an item that was damaged during shipping.
Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.