Shop Category
- DC Power Converter Regulator
- other
- General Industrial Parts
- Heavy Equipment Parts
- Hydraulics
- Manufacturing
- Molding
- Pneumatics
- Tool Machine Accessory
- Water Flow System
- Electronic Parts & Components
- Light
- Instruments
- DIY Accessories
- Batterys
- Insulating Materials
- Antistatic Materials
- Heat Elements
- Motors
- Mains/Power Distribution Equip
- Low-voltage Apparatus
- Plugs
- Power Supply
- Socket
- Switches
- Relays
- Electrical Instruments
- Other
Throat Tube, Brass Nozzle, Heater Block (with Heating Block Sponge)
What is this?
Throat Tube, Nozzle and Heater Block are 3D printer accessories, for all 1.75mm ABS PLA 3D printers.
What will I get?
Pack of 3 M6 Nozzle Throat Tube; Pack of 3 Print Head Nozzle(0.4mm); Pack of 3 Hot End Heater Blocks; Pack of 3 Heating Block Sponge; Stainless Steel Throat Tube: Length: 30mm/1.18inch; Diameter: 6mm/0.23inch. Nozzle Length: 13mm/0.51inch; Diameter: 6mm/0.23inch. Heater Block Size: 20x20x10mm/0.78''x0.78''x0.4''(LxWxH).
Are there any advantages of the product?
The throat tube is made of stainless steel, the nozzle is brass, the heater block is aluminum alloy. The nozzle of the extruder adopts a 0.4mm print head, the matching surface of it is smooth and the feeding is more convenient.
How to use it?
Remove the upper part of the extruder, replace the old nozzle, throat tube and heater block, loosen the throat tube fixing nut, remove the throat tube, then install the new one, and tighten the fixing nut.
What should I notice?
Please pay attention to clean the nozzle with cleaning tools in time to prevent clogging.
Throat Tube, Nozzle and Heater Block are 3D printer accessories, for all 1.75mm ABS PLA 3D printers.
What will I get?
Pack of 3 M6 Nozzle Throat Tube; Pack of 3 Print Head Nozzle(0.4mm); Pack of 3 Hot End Heater Blocks; Pack of 3 Heating Block Sponge; Stainless Steel Throat Tube: Length: 30mm/1.18inch; Diameter: 6mm/0.23inch. Nozzle Length: 13mm/0.51inch; Diameter: 6mm/0.23inch. Heater Block Size: 20x20x10mm/0.78''x0.78''x0.4''(LxWxH).
Are there any advantages of the product?
The throat tube is made of stainless steel, the nozzle is brass, the heater block is aluminum alloy. The nozzle of the extruder adopts a 0.4mm print head, the matching surface of it is smooth and the feeding is more convenient.
How to use it?
Remove the upper part of the extruder, replace the old nozzle, throat tube and heater block, loosen the throat tube fixing nut, remove the throat tube, then install the new one, and tighten the fixing nut.
What should I notice?
Please pay attention to clean the nozzle with cleaning tools in time to prevent clogging.
Item Specifics
| Brand | uxcell |
| Type | Extruder Nozzle Cleaning Kit |
| Net Weight | 0.055 |
| upc | 747709638775 |
- We accept eBay payment.
- Please do not email us to ask for other payment option.
- We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
- Usually we ship your order out within 24 hours in business day.
- For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
- Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
- Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
- If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
- Our US warehouse allows us to ship you the best products quickly and accurately. We are continually expanding our product selection to better serve your need.
- We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
- If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
Throat Tube, Brass Nozzle, Heater Block (with Heating Block Sponge)
What is this?
Throat Tube, Nozzle and Heater Block are 3D printer accessories, for all 1.75mm ABS PLA 3D printers.
What will I get?
Pack of 3 M6 Nozzle Throat Tube; Pack of 3 Print Head Nozzle(0.4mm); Pack of 3 Hot End Heater Blocks; Pack of 3 Heating Block Sponge; Stainless Steel Throat Tube: Length: 30mm/1.18inch; Diameter: 6mm/0.23inch. Nozzle Length: 13mm/0.51inch; Diameter: 6mm/0.23inch. Heater Block Size: 20x20x10mm/0.78''x0.78''x0.4''(LxWxH).
Are there any advantages of the product?
The throat tube is made of stainless steel, the nozzle is brass, the heater block is aluminum alloy. The nozzle of the extruder adopts a 0.4mm print head, the matching surface of it is smooth and the feeding is more convenient.
How to use it?
Remove the upper part of the extruder, replace the old nozzle, throat tube and heater block, loosen the throat tube fixing nut, remove the throat tube, then install the new one, and tighten the fixing nut.
What should I notice?
Please pay attention to clean the nozzle with cleaning tools in time to prevent clogging.
Throat Tube, Nozzle and Heater Block are 3D printer accessories, for all 1.75mm ABS PLA 3D printers.
What will I get?
Pack of 3 M6 Nozzle Throat Tube; Pack of 3 Print Head Nozzle(0.4mm); Pack of 3 Hot End Heater Blocks; Pack of 3 Heating Block Sponge; Stainless Steel Throat Tube: Length: 30mm/1.18inch; Diameter: 6mm/0.23inch. Nozzle Length: 13mm/0.51inch; Diameter: 6mm/0.23inch. Heater Block Size: 20x20x10mm/0.78''x0.78''x0.4''(LxWxH).
Are there any advantages of the product?
The throat tube is made of stainless steel, the nozzle is brass, the heater block is aluminum alloy. The nozzle of the extruder adopts a 0.4mm print head, the matching surface of it is smooth and the feeding is more convenient.
How to use it?
Remove the upper part of the extruder, replace the old nozzle, throat tube and heater block, loosen the throat tube fixing nut, remove the throat tube, then install the new one, and tighten the fixing nut.
What should I notice?
Please pay attention to clean the nozzle with cleaning tools in time to prevent clogging.
Item Specifics
| Brand | uxcell |
| Type | Extruder Nozzle Cleaning Kit |
| Net Weight | 0.055 |
| upc | 747709638775 |
- We accept eBay payment.
- Please do not email us to ask for other payment option.
- We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
- Usually we ship your order out within 24 hours in business day.
- For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
- Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
- Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
- If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
- Our US warehouse allows us to ship you the best products quickly and accurately. We are continually expanding our product selection to better serve your need.
- We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
- If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.