eBay

Product Description:

① 【Super Neat Filament Spool】SUNLU 3D printer filament product line is equipped with an excellent self-developed neat winding device, 100% neat rate, no clogs, making filament easier to use.
②【SUNLU PLA 3D Printer Filament】PLA filament is the most basic, the most used filament, no clogs, no bubbles, no tangle, SUNLU PLA filament has good layer adhesion, very easy to use.
③【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, making it suitable for almost all 1.75mm FDM 3D printers.
④【Filament Spool Diameter】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers.
⑤【Recommend Settings】We recommend printing the PLA filament at nozzle temperature of 200-230°C, bed temperature of 50-65°C, and printing speed of 50-100mm/s.
⑥【SUNLU Main Products】FDM 3D Printer, 3D Printer Accessories, 3D Printer Filament, Filament Dryer, 3D Pen, 3D Printer Resin, LCD 3D Printer, Resin Curing Box.

Filament	PLA	PLA Carbon Fibre	PLA+	PETG	ABS	PLA Meta	PLA Matte	WOOD	PLA Marble	Silk PLA+	TPU
Filament Diameter	1.75mm±0.02mm
Printing Temperature	200-210℃	215-225℃	205-215℃	230-240℃	250-260℃	185-195℃	205-215℃	205-215℃	210-220℃	205-215℃	195-205℃
Printing Speed	50-100MM/s								40-80MM/s	30-60MM/s	20-40MM/s
Melting Index/^10Min	7-9g (190℃, 2.16Kg)	11-16g (220℃, 2.16kg)	4-8g (190℃, 2.16Kg)	6-11g (220℃, 2.16kg)	12-19g (220℃,10kg)	8-12g (190 ℃, 2.16kg)	3-7g (190℃, 2.16Kg)	6-9g (190℃, 2.16kg)	7-9g (190℃,2.16Kg)	4-8g (190℃, 2.16kg)	5-8g (190℃, 2.16Kg)
Melting Point	165-180℃	170-190℃	170-190℃	180-190℃	170-180℃	155-170℃	155-170℃	165-180℃	165-180℃	165-180℃	175-180℃
Rally (KGF)	11-16	11-14	11-15	8-12	6-11	9-12	8-13	6-9	11-16	6-8	/
Elongation at Break	4%	4%	45%	210%	25%	35%	4%	4%	4%	200%	600%
Net Weight	0.25KG/1KG	1 KG/roll	0.25KG/1KG	1 KG/roll	1 KG/roll	0.25KG/1KG	1 KG/roll	1 KG/roll	1 KG/roll	1 KG/roll	0.5 KG/roll


High accuracy	1KG Size	Wide range of applications

FAQ

Why can't the filaments just stick to the hatchery?

1). Check the temperature setting before printing, PLA filament temperature about 190-220 ℃;

2). Check if the plate surface has been used for a long time. It is recommended to apply PVA glue.

3). If the first layer has poor adhesion, it is recommended to realign the print substrate to reduce the distance between the nozzle and the surface plate