Product Description
   
--Pair 6000LM 6500K White H7 Replace Factory Halogen High Beam--Pair 6000LM 6500K White H7 Replace Factory Halogen High Beam
---Pair 6000LM 6500K White H8/H11 Replace Factory Halogen Low Beam
---Pair 1500LM 80W 6500K White 881 889 886 896 Replace Factory Halogen Foglight
 
Fitment(For):
Hyundai Santa Fe 2009-2012
Hyundai Elantra GT 2013-2017
Hyundai Elantra 2009-2012 2014-2016
Kia Sorento 2017-2018
Kia Soul 2012-2013
Kia Sportage 2011-2016
Note: For 2009-2012 Hyundai Elantra,High Beam only fits Hatchback Models.
For 2014-2016 Hyundai Elantra,Low Beam only fits without projector-type headlamps.

Package Including:
---2pcs LED High Beam Bulbs
---2pcs LED Low Beam Bulbs
---2pcs LED Foglight Bulbs
 
Headlight Features
1.Adopted opening high speed cooling fan design, less noise and better heat dissipation.
2.Intelligent temperature control:Double protection circuit inside design, overheat protection and EMI, ensure longer lifespan and avoid interference problem.
3.Zinc Alloy Material Reflector and 2 sides emitting ensure for the better beam pattern and brightness.
4.Customized 2nd GEN
Z-ES chips,light efficiency increased by 25% comparing with ordinary chip, better temperature resistance, lumens up to 6000LM, lifespan Over 30,000 hours.
5.Our LED light come with exactitude light beam angle, no dazzling, no influence for the coming driver at left in front, improve brightness and distance. 
Foglight FeaturesBuilt-in exclusive constant current decoding driver chip system,can decode more than 90% of vehicles.
2pcs New CSP high power high brightness chips per bulb.
6500K white beam,natural beam pattern,a mass of clear white light with high penetration in the rain,foggy,dust days.
0.1S instant light up,super low load resistance.
Small illuminated surfaces, super bright high power chips, super condenser, provide more uniform and concentrated lighting.
High brightness, low energy consumption, 180% more brightness than original lights.
Constant current temperature control system to ensure the normal operation of LED bulbs.
High-performance protection, extended service life.
Excellent heat dissipation,45% increase in heat dissipation than normal products.
Power by advanced bright LED circuitry,100,000 hours of lifespan.
Uniform light spread,powerful LEDs with 360° light beam.
Optimized Cooling:Cold-pressed aluminum speed up the cooling rate to 30% ,ensure long lifespan.
 
Important Notice: This model don't come with CANBUS Error Free function
 
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.2. Put the vehicle into park or make sure it is securely in gear.3. Make sure to have the ignition turned off and the keys removed.4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb. 
8.Please install car headlight dust cover to ensure the normal operation of the lamp (to prevent dust and small ribbons to reduce the chances of bulb cooling fan broken to ensure the normal operation of the cooling system)
Note:After installation, dust prevention measures must be done, LED lamp life depends on the cooling performance is good or bad. The lamp heat mainly active cooling (fan-cooling based, supplemented by the whole aviation aluminum heat dispassion ) as the main cooling method, the life of the fan in lamp bulb directly affects the life of LED lights.