Feature
- Material: Stainless Steel
- Standard 1/8 BSPP size for Paint ball or for PCP Air Rifles.
- Can be used between micro bore hose and SCUBA cylinder charging fitting.
- Female socket fitting supplied with 1/8 BSPP male thread with cone for connection to a micro bore fill hose.
- Available with the UK industry standard 1/8″ BSP Male thread that suits most pump and cylinder fill lines.
- Safe for use on all pre-charged equipment with a Max Working Pressure of 340BAR, 5000psi.Do not exceed maximum working pressure.
- Our new socket has been designed to allow connection to “Foster Type” fill nipples that are recessed deeply within the stock.
- If you need a coupler release tool, then this socket should overcome that problem as the release collar is a full 30mm long, as opposed to the 10.5mm long on our standard coupler.
- Connects to our Q/C Plug, High Pressure Fill Valve, Daystate, Benjamin, Brocock, Crosman, Logun Eagle, PCR1, Ripley most HPA Paintball & Air Soft Tank side fill nipples & other compatible fill couplers.
- Suitable for FX deep recess stocks, Daystate and Brocock deep recess stocks early “Swift” and type Theoben & BSA Superten quick fills without the need for an additional coupler release tool.
- Also suits converted air tubes where the fill nipple has been installed after removing the pressure gauge from the recessed end of the air tube.
Package Include
1 x Charging Coupler Socket