2x 5500mAh 7.4V 2S LiPo Battery 60C Deans T plug for RC Car Airplane Helicopter

A3PRO FAST RC CAR BATTERY CHARGER NiMH LiPO TAMIYA + MINI TAMIYA Plug 6v 7.2v

UK STOCK+Fast Delivery

 TE3025 A3PRO RC CAR BATTERY BALANCE CHARGER B - Nimh / LiPO / LiFE

 INTRODUCTION:

 Thank you for your choice of the TE3025, 100-240V AC balance charger. This unit is simple to use but its operation does require some knowledge on the part

 of the user. -Please read this entire operating manual completely and attentively before using this product, as it covers a wide range of information on operating

 and safety.

 TE3025 Charger is an economic, high-quality 100-240V AC balance charger, designed for charging, LiPo, and LiFe batteries from 2/3 cells in balance mode.

 NiMH batteries from 1s-8s cells in the 3s cells balance socket. The circuit power is 25W and the max charge current can reach 3A. TE3025 charger can check

 batteries capacity and charging with 1C current

 CHARGE PROCEDURES:

 TE3025 comes with a built-in power supply. You can connect the AC power cord to the AC

 socket(100-240V AC) directly

 Note: This charger can charge LiPo/ LiFe and NiMH batteries in balance mode ONLY. In this case you must use a balance board to connect the charger with the

 battery

 Please refer to the following steps to charge the battery,

 1)Insert the AC power cord into the charger.

 2)Insert the AC cord into a wall socket(100-240V). All LEDs will be lighted

 3)Select the battery type LiPo/LiFe/NiMH

 4)Connect the LiPo/LiFe/NIMH battery's balance wire to the chargers balance socket and select the corresponding button to start charging

 5)The charger starts charging The charge status LED uses the wire to connect 3 cells balance socket will flash.

 6)When the battery is fully charged, the charge status LED will glow constant green/orange/red.

 EXPLANATION OF LED STATUS:

 Charging

 Lipo: Green LED flash

 Life: Orange LED flash

 NINH: Red LED flash

 Full

 Lipo: Green LED constant

 Life: Orange LED constant

 NINH: Red LED constant

 SPECIFICATION:

 AC Input: 100-240V

 Battery Type: LiPo/LiFe/NiMH

 LiPo/LiFe: 2S/3s Lipo/Life Battery

 NiMH: 1-8s  (1.2v, 2.4v,3.6v, 4.8v, 6.0v, 7.2v, 8.4v, 9.6v) NiMH batteries

 Charge Current: 3A max

 Circuit Power: 25W

 Current Drain for Balancing: 200mA

 Dimension: 92×67X35mm

 Weight: 105g

 

 Standard Tamiya connector + Mini Tamiya connector cable included

 Package Include: 1x TE3025 A3PRO RC CAR BATTERY BALANCE CHARGER

PushAuction