Stainless Steel Manual
3-Way, "T" Type Ball Valve
Temperature Range | -4 to 356° F |
Pressure Rating | 1000 PSI |
Operation Type | Bi-Directional |
Handle | Locking |
*Suitable Media |
Potable Water -*Etc |
Body Material | Stainless Steel |
Components | Stainless Steel |
Seal Material | PTFE |
Thrust Washer | PTFE |
Stem Packing | PTFE |
Orifice Size | 1/2" |
Flow | Bi-Directional |
Bore Type | Standard Bore |
Weight | 1.47 lbs |
Height | 2.95" |
Length | 3.11" |
Width | 5.55 |
The BV-3WT015-S is a 1/2”
Stainless Steel 3-way, “T-Type” manual ball valve. These are also known as
T-Port or Mixing Ball Valves. They are
used to divert media flow in multiple directions at the same time. 3-way valves
eliminate the need for multiple two-way valves to accomplish the same task. The
ball cut out is shaped like the letter “T” allowing for many flow patterns. This ball valve is bi-directional and allows
for any two or three ports to be connected, but it only allows for flow in one
direction at a time, this means any of the ports can be either an outlet or an
inlet. This valve cannot be closed.
This 3-way valve is made
from high-quality, lead-free stainless steel with PTFE seals. This allows the valve to operate under a wide
range of temperatures (-25° F to 356° F ) and Pressures (max. 1000PSI). These
valves are commonly used for homebrewing, and food-grade and potable water
applications but due to the resistance to high-heat, and many different
chemicals and gases the uses are nearly endless. A chemical compatibility
expert should always be consulted to ensure any materials you are using are the
correct choice.
This valve is fit with a
position indicator on its blow-out proof stem, a locking handle and a positional
bolt that prevents the ball from being turned to unwanted positions. Each port has
NPT threading for easy installation.