Double Wire Bolt Adjustment Clip
A very useful clip where concentrated clamping force is needed.
All the clamp's capacity is focused on a fine contact area, and of course the smooth edges of the round wire will protect the hose when installation.
Product Details:
Material: H.T. wire zinc coated
Sizes:19mm-53mm
Easy
to install.
Rounded
Edges to protect wires/ pipes from damage.
Large
room for adjustment.
Zinc
coated for corrosion resistance.
Quantities:
Sold in boxes of
40's
Box Set Content
| Clamping Range | Quantity |
|---|---|
| 19.0 - 23.0mm | 10 |
| 25.0 - 29.0mm | 10 |
| 30.5 - 35.0mm | 10 |
| 38.5 - 43.0mm | 10 |
Flexi Driver:
The Flexi Driver is an indispensable tool for installing clamps, thanks to its long reach and flexible neck. Please refer to the link below for more information on the Flexi Driver.
How To Install:
Slide Clip Over the item
Make sure you have screwdriver or
flexi driver
Tighten the screw on the clip enough
to hold the parts together
How To Decide on The Size:
Always measure the outside (O.D) of the hose, not the internal diameter (I.D), then match the outside diameter of the hose to the inside diameter of the clamp. If the hose is 50mm outside diameter use a 46.5-53mm clamp.
How To Remove:
Get
your screwdriver or flexi driver
Undo
the screw and remove the Clip