Feature
●Zipper Foot
It is very narrow and split in the center so that you can get very close to either side of a zipper or just sew close to Buckles, D Rings, Snaps, Grommets, etc.
●Presser Foot
This foot is similar to a regular presser foot but narrower for finer work on more delicate fabrics. It can be used to set zippers.
●Standard Seaming Foot
This is the Standard Seaming Foot that is installed on new Single Needle Machines at the factory.
●Standard Feeder
This is the Standard Feeder that is installed on all new machines at the factory. This feeder is suitable for all types of standard wash and wear apparel up to medium heavy applications.
●Fine Tooth Feeder
This is a fine tooth feeder that is used on delicate fabrics. Lingerie and other fragile fabrics will often show tooth marks from a regular feeder. This feeder will fit into the Needle Plate included in this set.
●Standard Needle Plate
This is the Standard Needle Plate that is installed on new machines at the factory. This Needle Plate will fit both feeders in this set.
●Aluminum Bobbins
These are ALUMINUM Bobbins with no holes. Aluminum Bobbins are lighter than Steel Bobbins and are usually very expensive compared to steel.
●Steel Bobbins
These are Black STEEL Bobbins with holes on both sides. Steel Bobbins are installed into new Industrial Single Needle Machines at the factory.
●White/Silver Steel Bobbins
These are White/Silver STEEL Bobbins with holes on both sides. Steel Bobbins are installed into new Industrial Single Needle Machines at the factory.
●Tweezers
This is a very popular style brand new pair of 6" Tweezers bent at the tips with a positioning pin in the blades.
●No Back Lash Bobbin Case Assembly
This is a No Back Lash Bobbin Case Assembly for most Singer/Juki/Consew Style Single Needle Machines. There is a built in Anti-Bobbin-Spin spring that prevents the bobbin from spinning when the machine is stopped. This is the standard Bobbin Case installed at the factory. These are "L" size bobbin cases.
●No Back Lash Bobbin Case With Pigtail Thread
This BRAND NEW No Back Lash Bobbin Case has a PIGTAIL Thread Guide and fits Single Needle, Zig Za, and Embroidery Machines. This Bobbin Case has a very large needle slot to allow for needle flexing and prevents your needles from contacting the Bobbin Cases. This is an "L" size bobbin case.
Fit For The Following Industrial Single Needle Machines:
For ARTISAN: 196R,5550N,8500N,ZJ-100
For BROTHER: B705,B707,B715,B716,B735,B737,B738,B745,B755,B757,B758,B767,B781
For CONSEW: 30,98,99,102,103,105,210,217,218,219,220,230,290,310,2230,7360R-1
For JUKI: DDL-127,DDL-227,DDL-500,DDL-501,DDL-552,DL-553,DDL-555,DDL-5550,DDL-5600,DDL-8300,DDL-8500,DDL-8700,DDL-9000
For MITSUBISH: DB-120,DB-121,DB-122,DB-126,DB-130,DB-170,DB-189,DB-199,LS2-130,LS2-150,LS2-180,LS2-190,LS2-1130
For SUNSTAR: KM-123A,KM-123B,KM-137A,KM-137B,KM-146BL,KM-250
For COLUMBI: N430
For CUTSEW: 777,787
For CUTLINE: C220
For FEIYUE: FY8500,FY8700
For GEMSY: 8700
For NECCHI: SUPERNOVA,JULIA
For RELIABLE: MSK-8800,MSK-8550M,MSK-8870M
For REX: RX8500
For RICCAR: RD-102
For SINGER: 44,95,96,120U,121C,121D,188K,191D,195K,196K,241,251,281,331K,366K,400W,402W,451K,491D,591D,600W,660A,691D,770D,771D,2191,2491D
For SUNSEW: GC1130,GC5550,GC6180,GC8500,GC-B735,GC-C111
For TACSEW: 5550,T8700
For TAIKO: TK-505,TK-510
For TOYOT: AD156,AD157,AD338,D146,D147,D347,D348,D1422-42,D2432
For TYPICAL: GC6-1-D3E2,GC6150B,GC6150H,GC6150M,GC6160D3,GC6195M
For UNICORN: LS2-H520,LS2-H530,LS2-H5100,LS2-H5200,LS2-H5300
For YAMATA: FY8500,FY8700
For ZOJE: ZJ15-1,ZJ80-1,ZJ90-1,ZJ999-1,ZJ999-5,ZJ5580,ZJ5580-D3,ZJ8500-D3,ZJ8500N
Package Include
31 x Sewing Machine Parts
