Welcome
Product Description
BEVINSEE H4 9003 HB2 LED Headlight Bulbs to Replace Old Halogen Bulbs
FeaturesEach Bulb have 2 sides of 6 PCS SEOUL-CSP LED Chips
External Drive and FAN ,ALL-IN-ONE Technology
Integrated EMC Siam Drive to reduce the chance of contact failure
The lamp body is smaller and can be adapted to more models. The fitting rate reaches 99.98%.
Smart Efficient
Cooling System, Reduce or eliminate the noise caused by fan rotation,
make driving more quiet, 180% increase in heat dissipation than normal
products.
Reduce the electromagnetic interference,Reduce the impact of radio waves. are friendly to the car radio.
High quality Aluminum heat dissipation ensures the secure temperature range.
Low Power Consumption than Halogen bulb, Energy Saving
Low Voltage Protection, High Precision Constant Current driver Chip.
Shakeproof ,Dustproof and Long lasting up to 50,000 Hours.
Easy installation, Plug and Play.
Our 60W LED headlights are brighter than the 100W Original lights
Light point is close to the original luminous light spot, closer to the original car light effect type
Item Specifics Lumen: 8000LM/Pair
Wattage: 60W/Pair
Colour Temperature: 6000K White
Operating Temperature: -40℃~80℃
Heat Control: Aircraft Solid Aluminum Body
Electric Current:898mA-2560mA
Normal operating input minimum voltage:12 V
Normal operating input minimum current:2.65 A
Normal operation input maximum voltage:32 V
Normal operation input maximum current: 0.898 A
Fitment: Hi/Low Beam
For Honda Civic MK3 MK4 MK5 MK6 MK7 1987-2005
For Honda Jazz MK2 MK3 MK4 2002-2020
For Honda Stream 2001-2007
For Honda Prelude 1983-1995
For Honda Shuttle 1994-2001
For Honda Concerto 1989-1995
Package including: 2 x LED Headlight Bulbs Imporatnt Notice:
This
item wasn't exist self-decoding/self-Canbus【anti-flashing
/anti-warning】function and DRL【Daytime running light】 function!!! (You can use the H4 decoder to solve the problem, click here)
-- After installing the LED bulbs, the Vehicle needs to be decoded in the following cases:
1. the headlight light is flashing, strobe or indefinitely flashing(Electrolytic capacitor decoding may worked).
2.
the on-board computer(ECU) reports an error, the central control panel
displays an error icon or displays bulbs burns out error
message.(Resistance decoding may worked)
3. The bulbs does not work. What you can do is connect the bulbs to12V DC ,it can work normally(Resistance decoding may worked).
situation 1: use this case to judge whether it need to be decoded.
situation
2:use this case to judge whether is a reverse polarity plug(turn bulb's
plug 180° to insert into headlamp and turn on to test)
Feasible Solution:
1.
Install the decoder; the decoding rate of the decoder on the market is
about 90%, can not completely decode all models, the turnover rate is
larger.
2. Install the resistor, you need professional installation.
3.
Using ODM to read the error information code of the ECU on-board
computer, through programming means, correct the error information to
achieve the decoding effect.
Please mind to check whether the installation space is sufficient.
Some parts need to be removed before install this item to make enough installation space for it.
It may be necessary to replaced the customize dust cover of your headlamp.
Attention:
If you want to use LED
bulb on some European vehicles, and the following issue occur on it,
those are NOT problems of LED bulb and NOT covered by warranty. It means
you may need to buy a set of load resistor:--Hyper Flashing --No Light --Error code shows up Please contact with us if you still have any questions.
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.2. Put the vehicle into park or make sure it is securely in gear. 3. Make sure to have the ignition turned off and the keys removed. 4. Be careful to avoid burns, especially when turning on or off the vehicles lighting. 5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting. 6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems. 7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb. You can use the H4 decoder to solve the problem, click here DISCLAIMER
Disclaimer: Bevinsee parts are not sponsored or endorsed by, or
affiliated with the brands its parts fit, including Porsche, Subaru,
Jaguar, BMW, Isuzu, Chrysler, Dodge, Jeep, Buick, Cadillac, Chevrolet,
GMC, Volvo, Land Rover, Oldsmobile, Pontiac, Ford, Lincoln, Mercury,
Acura, KIA, Nissan, Infiniti, International Harvester, Mitsubishi, Audi,
Lexus, Toyota, Mazda, Volkswagen, Suzuki, Saab, Honda, Alfa Romeo,
Saleen, Mercedes-Benz, Nash, Hummer, Freightliner, Datsun, Saturn,
Turner, Geo, Lada, Fiat, Daihatsu, Opel, Vauxhall, Sabra, Tesla, Ram,
Rover, Skoda, Harley, Mini, Smart, Scion, Renault, Seat, Peugeot,
Merkur, Astra, Tucker, VW, Routan, Tiguan, Touareg, Jetta, Gti, Passat,
Golf, Bosch, Denso, Holden, Chery, Mercedes Benz, Holden Special
Vehicles, Hyundai, Trabant, Citroën, Yamaha, Polaris, Can-am, Arctic
Cat, Kawasaki, Ski-Doo, Harley-Davidson, KTM, Duke, Husaberg, Husqvarna,
Aprilia, Triumph, Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli,
Buell, CF-Moto, Enfield, Hyosung, Indian, Beta, GASGAS, Sherco, etc.
Payment Policy
Shipping Policy
Return & Refund
Feedback
About Item
Customer Satisfaction
|