- Origin : CN (Origin)
- Model Number: Tools Auto Repair Tool Car Dent Repair Dent Puller
- tool for car repair: Car dent repair
- Function 1: Paintless dent repair tools
- Function2: Reverse Hammer
Description:
This Paintless Dent Removal T-Bar Puller is a lightweight glue tab pulling tool, intended for use in repairing pressure dents and any dent that is not sharp or creased.
The tension puller works well with a hammer for pulling large bumps.
It's very easy to control, everyone can remove the dent easily by themselves.
Features:
1. The sliding hammer is more powerful in repairing dents, conquering big bumps.
2. The principle is to stick glue tabs on the dent and use tools to pull the tabs and lift the dent.
3. Big dents need slide hammer or puller; Small bumps need a mini dent lifter or traction bridge.
4. Different tabs for different dent pullers or slide hammer, works with all glue pullers.
5. Use a slide hammer or dent puller or other pulling tool to lift the dent, try several times.
How to use:
1. Clean the dent with a clean, damp cloth;
2. Fit the glue stick into the glue gun, press the trigger to let the glue stick into the glue gun, connect the power source and preheat for 5 minutes;
3. Use an appropriate drawing gasket. The large bump requires a large drawing joint.
4. Pull the trigger and apply the drawing gasket with extruded glue;
5. Quickly place the drawing seal with hot melt glue in the center of the dent, press lightly until the glue hardens and adheres;
6. Align the T-shaped repairer and press the drawing joint with hot melt glue, pull the sliding rod back to raise the dent;
7. Check with a dashboard. If the dent still exists, tap it lightly with a hammer or flattening pen;
8. Clean the repaired area with a clean, damp cloth.