This listing is for a 3m piece of 16AWG 4 lead Double Shielded, 0.75mm, STEPPER MOTOR CABLE .
CAN BE CUT TO ANY LENGHT REQUIRED
A MUST FOR STEPPER MOTOR CONNECTIONS
Best cable to stop interference
. (This cables outer diameter is 7.5mm)
TECHNICAL DATA
Special PVC control cable adopted to E DIN VDE 0245 0281 part 13
CONDUCTOR RESIDENCE
DN VDE 0295
TEMPERATURE RANGE
flexing -5C to 80C
NORMAL VOLTAGE
300-500V
CABLE STRUCTURE
Bare copper.fine wire conductors
Core insulation of special PVC Z7225
Black cores with no DIN VDE0293
PROPERTIES
EXTENSIVELY OIL RESISTANT
FLAME RESISTANT
CADMIUM FREE,NO SILICONE FREE FROM HARMFUL SUBSTANCES
Best cable to stop interference between your spindle and VFD or stepper motors .Can be used for spindles up to 4.5KW
This cable is rated to 600v, and 80C-100Cdegrees Celsius This cable is designed for your spindle to VFD connection to protect your CNC system from EMI penetration.
This cable is professional Robotics grade, and features both Mylar foil, and tinned braided copper shielding with twine separator in the center of the four conductors, and 16awg ground drain lead for the minimal electrical resistance.
Can supply any length of cable you require -please ask
- PVC cable adapted to
DIN VDE 0285-525-2-51 /
DIN EN 50525-2-51 - Temperature range
flexing -15°C to +80°C
fixed installation -40°C to +80°C - Nominal voltage
U0/U 300/500 V - Test voltage
4000 V - Breakdown voltage
min. 8000 V - Mutual capacitance
acc. to different cross sections
0,5 up to 2,5 mm²:
core/core approx. 150 pF/m
core/screen approx. 270 pF/m - Coupling resistance
max. 250 Ohm/km - Minimum bending radius
flexing 10x outer Ø
fixed installation 5x outer Ø
Cable structure- Bare copper conductor,
fine wire acc. to
DIN VDE 0295 cl.5 / IEC 60228 cl.5 - Core insulation of PVC
compound type Z 7225 - Core identification to DIN VDE 0293
black cores with continuous white
numbering - GN-YE conductor, 3 cores and above
in the outer layer - Cores stranded in layers with
optimal lay length - Inner sheath of PVC
- Tinned copper braided screen,
approx. 85% coverage - Outer sheath of PVC
- Sheath colour: transparent
- With meter marking
Properties- Extensively oil resistant,
oil-/chemical resistance
see "Technical Information" - The materials used during manufacturing
are cadmium-free, contain no silicone
and are free from substances harmful
to the wetting properties of lacquers
Tests- Flame retardant acc. to
DIN VDE 0482-332-1-2 /
DIN EN 60332-1-2 / IEC 60332-1-2
Note- G = with GN-YE conductor
x = without GN-YE conductor (OZ) - The conductor is metrically constructed
(mm²). The AWG designation is
approximate and purely informative. - Unscreened analogue type:
JZ-500
ApplicationFor use as connecting and control cable in machinery, computer systems etc. as well as a signal cable for electronics. The high level of screening ensures a high degree of interference protection. The screening density assures disturbancefree transmission of all signals and impulses. The PVC-inner sheaths of those cables raise the mechanical stress. The applied clear transparent PVC outer sheath accentuates the optical view of the tinned copper braid.
EMC = Electromagnetic compatibility
To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.