AC85~250V 10A 2200W 2CH Remote Control Switch Wireless Relay Receiver for rf 433MHz Remote Garage Lighting Electric Door switch

Relay Receiver Board Parameter

• Working voltage  :  AC 85V~250V
• Input vlotage  :  1~250V
• Output vlotage  :  1~250V
• Quiescent Current  :  <5MA
• Max current  :  10A
• Max load:   2200W
• RF frequency  :  433MHz
• Pin  :  NO / COM / NC
• Working temperature  :  -30~+80
• Receiving Sensitivity  :  >97dbm
• Amount of storage remote controls  :  25 pieces
• Support encoding  :  1527 Leaning code /2262 fixed code
• RF Operating mode  :  ASK superheterodyne wireless reception
• Receiving range  :  Open space is more than 50 meters
• Remote operating mode   : Momentary Mode / Toggle Mode

Product Application Area
Products can be used in homes, farms, factories, offices, laboratories, supermarkets and so on.
Remote control garage door \  Electric door \ house door \ shutter door \ expansion door \ gate door \ road gate
Remote control Electric curtain \ Water pump \ Fan \ Lamp \ LED light \ bulb \ ventilation device \ Signal transmission
Remote control motor positive and negative rotation \  motor switch \ DIY

Working Modes

You can set up in 3 modes: Momentary mode,Toggle mode and Latched mode.
Momentary mode:

Press and hold A button,1st relay will work;Release A button,1st relay will stop.
Press and hold B button,2nd relay will work;Release B button,2nd relay will stop.

Toggle mode:

Press A button,1strelay will work;press A button again,1st relay will stop.
Press B button,2nd relay will work;press B button again,2nd relay will stop.

Latched mode:

Press A button,1st relay will work;press B button,1st relay will stop,2nd relay will work.Press A button again, 2nd relay will stop, 1st relay will work

How to Set up
Momentary mode:
Press learning button once,press A button once,succeed.

Toggle mode:
Press learning button twice,press A button once,succeed.

Latched mode:
Press learning button 3times,press A button once,succeed.

Clean data:
Press learning button 8times,the data will be cleaned.All remotes cannot control this receiver.

1.Big holes ,easy to connect with wires
2.Wide voltage , for lights/motors/garage/fan/DIY
3.50m remote range, 433MHz stable signal