Features:
1) All parts are hand inspected off the line before packaging and once again by our team before shipment.
2) According to the original factory specifications.
3) Perfect match for the original car.
4) Easy installation.
5) Stable Characteristics, High Reliability.
6) Aftermarket Products with Premium Quality.
Description：
This wire harness provides a connection for one set of RCA cables to provide an audio signal to an external amplifier, as well as an add-a-circuit with remote wire for the remote amplifier turn on wire. This wire, along with a set of RCA cables, is run to your aftermarket amplifier. All that’s left for you to do is connect the main power wire from your battery and ground. (Not included)
Audio volume to the amplifier can be adjusted by the dials on the harness. For easier access we recommend using an external volume knob.(Not included）
It is up to the installer to select which circuit to use with the Add-A-Circuit. The radio circuit is most common however any that turns on/off with the ignition could be used if deemed appropriate.
A variety of wire colors may be used for the remote wire coming off the harness. Regardless of color, rest assured it is for the remote turn on of an amplifier.
Installation：
Remove your factory radio
Unplug the factory wiring and plug in this wire harness
Reinstall your factory radio
Compatible with these models：
2018 Ford Edge
2015-2017 Ford Edge
2011-2014 Ford Edge (with 4.2-inch screen)
2013-2018 Ford Escape (with 4.2" screen)
2011-2018 Ford Explorer (with 4.2-inch screen)
2018 Ford F-150
2015-2017 Ford F-150
2013-2014 Ford F-150 (with 4.2-inch color screen)
2018 Ford F-250/350/450/550 (base model "XL" with CD) ("XLT")
2018 Ford F-250/350/450/550 (base model "XL" with AM/FM only radio)
2017 Ford F-250/350/450/550 (base model "XL" with CD) ("XLT")
2017 Ford F-250/350/450/550 (base model "XL" with AM/FM only radio)
2014-2018 Ford Fiesta (without MyFord Touch) (silver dash)
2014-2018 Ford Fiesta (without MyFord Touch) (black dash)
2011-2013 Ford Fiesta (with SYNC) (silver dash)
2011-2013 Ford Fiesta (with SYNC) (black dash)
2011-2013 Ford Fiesta (without SYNC) (silver dash)
2011-2013 Ford Fiesta (without SYNC) (black dash)
2015-2017 Ford Focus (with 4.2-inch screen)
2012-2014 Ford Focus (without MyFordTouch)
2017 Ford Fusion
2013-2016 Ford Fusion
2015-2017 Ford Mustang (with 8-inch screen)
2015-2017 Ford Mustang (with 4-inch screen)
2015-2016 Ford Transit (without NAV ) (with separate 4.2-inch screen)
2015-2018 Ford Transit (without NAV) (without separate 4.2-inch screen)
2014-2016 Ford Transit Connect (with NAV)
2014-2016 Ford Transit Connect (without NAV) (with cd) (gray dash)
2014-2016 Ford Transit Connect (without NAV) (with cd) (black dash)
2014-2016 Ford Transit Connect (without NAV) (without cd)
Package Including：
(1) plug and play wire harness
(1) Add-A-Circuit fuse tap
(1) 3 amp fuse
Converter adjustment instructions:
After completing all of the necessary connections, turn the adjustment pots all of the way down by rotating them completely counter-clockwise.
Turn the stereo system on and adjust the main volume control on the stereo to approximately 3/4 maximum volume.
Select one of the adjustment pots and turn it slowly clockwise until you notice audio distortion and then stop.
Turn the remaining pot to the same position as the previously adjusted pot.
