Electric Soldering Iron Heater Ceramic Internal Heating Element for 908 908S




 

Style:Short Wire/Long Wire
Quantity:1/2pcs
Size:60x3.8mm
220v electric soldering iron heating core
Power:60W/80W/100W
Ceramic heating core
Brand new with high quality
Material:Ceramic
Preparation:
1. always keep the tip clean, be sure to liberally coat the bit with solder the first time the iron is turned on. Note: initial tin is made in order to prolong the life of the bit.
2. wet the provided sponge before using.
3. check that the solder wire is ready for use and properly extended from the case as shown in step 1 in the illustration above below.
4. make sure that the bit fits comfortably and has proper contact with the inner element.
How to weld:
How to change / replace bits:
Using the soldering iron
1. after turning on the iron, the bit will start to heat up and be ready for use when the solder wire starts to melt on contact.
2. Start the weld by ensuring the melt weld makes a clean connection between the contacts you are trying to weld.
3. move the solder wire and iron away once enough solder is placed and clean all residual solder using the wet sponge.
4. always remember to unplug the iron from the mains and place it on the provided support while cooling enough to be safely stored.
Grades:
1. Wear safety and take necessary precautions to avoid injury or fire.
2. the iron heats up quickly. Select a suitable temperature to operate at. Using the iron for long hours and at a high temperature can shorten the product's life.
3. be sure to connect only the iron when necessary and unplug it when not, in order to reduce the risk of injury and fire.
4. clean the soldering tip always so often to extend its life. Avoid using chemicals and abrasive surfaces, as this could damage the metal surface.
5. The bits provided are 900m series and spare parts are available from where you purchased this product.
Package Include:
1pc or 2pcs electric soldering iron heater
Notice:
1.1cm=10mm=0.39inch.
2.Please allow 1-2mm error due to manual measurement and make sure you do not mind before ordering.
3.Please understand that colors may exist chromatic aberration as the different placement of pictures.




- We accept Paypal ONLY. 





Thanks for your bid


* We will arrange shipping for you within 24 Hours after payment cleared except the holidays.

* We always send the item to the address you give us on PAYPAL to ensure the security of the     item. If you have changed your address, or want us to ship to another address, please               change to the new address when you pay us with PAYPAL, otherwise we will not be      responsible if the package is lost.



International Buyers Please Note: 

* Import duties, taxes and charges are not included in the itemprice or shipping charges. These charges are the buyer responsibility. 




Our working time:

* Hong Kong time : Monday to Saturday 8:30 am to 5:30 pm.
Style:Short Wire/Long Wire
Quantity:1/2pcs
Size:60x3.8mm
220v electric soldering iron heating core
Power:60W/80W/100W
Ceramic heating core
Brand new with high quality
Material:Ceramic
Preparation:
1. always keep the tip clean, be sure to liberally coat the bit with solder the first time the iron is turned on. Note: initial tin is made in order to prolong the life of the bit.
2. wet the provided sponge before using.
3. check that the solder wire is ready for use and properly extended from the case as shown in step 1 in the illustration above below.
4. make sure that the bit fits comfortably and has proper contact with the inner element.
How to weld:
How to change / replace bits:
Using the soldering iron
1. after turning on the iron, the bit will start to heat up and be ready for use when the solder wire starts to melt on contact.
2. Start the weld by ensuring the melt weld makes a clean connection between the contacts you are trying to weld.
3. move the solder wire and iron away once enough solder is placed and clean all residual solder using the wet sponge.
4. always remember to unplug the iron from the mains and place it on the provided support while cooling enough to be safely stored.
Grades:
1. Wear safety and take necessary precautions to avoid injury or fire.
2. the iron heats up quickly. Select a suitable temperature to operate at. Using the iron for long hours and at a high temperature can shorten the product's life.
3. be sure to connect only the iron when necessary and unplug it when not, in order to reduce the risk of injury and fire.
4. clean the soldering tip always so often to extend its life. Avoid using chemicals and abrasive surfaces, as this could damage the metal surface.
5. The bits provided are 900m series and spare parts are available from where you purchased this product.
Package Include:
1pc or 2pcs electric soldering iron heater
Notice:
1.1cm=10mm=0.39inch.
2.Please allow 1-2mm error due to manual measurement and make sure you do not mind before ordering.
3.Please understand that colors may exist chromatic aberration as the different placement of pictures.
PAYMENT


- We accept Paypal ONLY. 



SHIPPING

Thanks for your bid


* We will arrange shipping for you within 24 Hours after payment cleared except the holidays.

* We always send the item to the address you give us on PAYPAL to ensure the security of the     item. If you have changed your address, or want us to ship to another address, please               change to the new address when you pay us with PAYPAL, otherwise we will not be      responsible if the package is lost.

Terms of Sale

International Buyers Please Note: 

* Import duties, taxes and charges are not included in the itemprice or shipping charges. These charges are the buyer responsibility. 


ABOUT US
Our working time:

* Hong Kong time : Monday to Saturday 8:30 am to 5:30 pm.


DataCaciques