- This disc cutter is a perfect tool to cut Square shaped cut outs of sheet metal and will cleanly cut the same sizes every time.
- All 7 punches are having the Non Cutting side Chamfered Edges for Easy Safe Handling.
- The main block is engraved with mm sizes of punches on it :
4mm X 4mm
6mm X 6mm
8mm X 8mm
10mm X 10mm
12mm X 12mm
14mm X 14mm
16mm X 16mm
- Cutter is suitable to cut up to 20 gauge soft metal, and can be used on a rubber mat or block to ease
the cutting process and protect your work surface.
- Each Punch Is tempered to Rockwell hardness rating 60 built to last for longer than similar items
elsewhere on the market.
- High grade Tool steel
- Die plate spring loaded to allow for easy clamping of material base
- Can be used with a hydraulic press
Dimensions :
- Base 75mm x 75mm
- Weight 1.4Kg
USAGE :
- Remove All the punches from the main block
- Select the punch size as per your work.
- Now turn the handle to separate the two discs.
- Place your Sheet metal in the slot between the two discs.
- Align the sheet metal in the correct slot size.
- Clamp your sheet metal buy turning the handle in opposite direction.
- Grab the punch and put it in the slot so that the cutting side faces down.
- Make sure that the worktable is sturdy or place the cutter on one corner of the table. This will ensure enough energy is transferred for cleaner cuts.
- Strike at the top of chamfered top of the punch with a heavy mallet until it pierces through the sheet metal. Take care of your fingers and other items on your work table.
Care ' Maintenance ' Tips :
- On punch Blades, Use candle wax or other lubricant for lubrication between uses for cleaner cuts and blade protection.
- Keep the rest of the cutter lubricated with suitable oil to prevent from rust and moisture. Store it in a dry location away from moisture and water.
- Insert a piece of same thickness sheet metal of suitable size on the side opposite to where cuttings is done. This will keep upper and lower plates aligned and the guiding pins undamaged over long use.
#NOTE#
- This cutter is suitable for soft sheet metals like brass, copper, silver and gold.
- We DO NOT provide RUBBER BASE or WOODEN BOX or ANY OTHER PLASTIC STAND/ STORAGE items.
- Additional Import Customs Duty Charges may be applicable.
- Paying Import Customs Duty in destination country is Entirely Buyer's responsibility and should be paid on time when notified by shipping company.
- Since these charges are decided by customs department of every country and varies country vise or state vise for some countries, there is no way to identify beforehand the exact amounts for every country or state. So it is not included in ebay prices.