140mm radiator fan shroud intended to be sandwiched between your AIO radiator and 140mm computer fans to optimize airflow.

Choose as large a height for the shroud as will still fit with reasonable clearance. The 30mm is the most efficient.

Fits standard 140mm computer fans and 280mm or 420mm AIO radiators. Will almost certainly fit unless you have a really strange fan; or radiator. If in doubt refer to the technical drawing and measure your fan & radiator, especially the frame in between the fan mount holes . Please check your radiator's threading is either M3 or #6-32 (more common).

There may be a small gap at the radiator side because radiators are different, some have the metal curving in a little between the standardized holes and some are flush,etc. But, if you have standard 140mm fans it should be airtight at the fanside where the pressure is and where it matters.

If you need an adapter for other sizes or want another color just message me.

Does not come with screws.

Does come with 32x 1-4mm (8x each) #6-32 spacers in the matching color - this is just in case your screws are too long and bottom out in the radiator you can still get an airtight fit.

ONLY ONE SHROUD INCLUDED and 32x #6-32 SPACERS IN MATCHING COLOR.