| range of product | OsiSense ATEX D |
|---|---|
| series name | Special format |
| product or component type | Limit switch |
| product specific application | For hoisting and mechanical handling applications |
| device short name | XCR |
| body type | Fixed |
| head type | Rotary head |
| material | Metal |
| fixing mode | By the body |
| movement of operating head | Rotary |
| type of operator | Stay put crossed rods lever metal square rod 6 mm |
| switch actuation | By any moving part |
| type of approach | Lateral approach, 2 directions |
| electrical connection | Screw-clamp terminals, clamping capacity: 1 x 0.34...2 x 1.5 mm² |
| cable entry number | 1 tapped entry for Pg 13.5 cable gland (included) 9…12 mm |
| number of poles | 4 |
| contacts type and composition | 2 x (1 NC + 1 NO) |
| contacts insulation form | Zb |
| contact operation | Snap action |
| number of steps | 1 |
| contact block per direction [control circuit] | 1 per direction |
| positive opening | With |
| minimum force for tripping | 0.7 N |
| minimum torque for tripping | 0.6 N.m |
| maximum actuation speed | 1.5 m/s |
| IP degree of protection | IP65 conforming to IEC 60529 |
| minimum actuation speed | 0.01 m/min |
|---|---|
| maximum displacement angle | -90 ° 90 ° |
| contact code designation | A300, AC-15 (Ue = 240 V), Ie = 3 A conforming to EN 60947-5-1 A300, AC-15 (Ue = 240 V), Ie = 3 A conforming to IEC 60947-5-1 appendix A Q300, DC-13 (Ue = 250 V), Ie = 0.27 A conforming to EN 60947-5-1 Q300, DC-13 (Ue = 250 V), Ie = 0.27 A conforming to IEC 60947-5-1 appendix A |
| [Ui] rated insulation voltage | 300 V conforming to UL 508 500 V conforming to NF C 20-040 group C 500 V (pollution degree 3) conforming to IEC 60947-1 500 V (pollution degree 3) conforming to VDE 0110 |
| maximum resistance across terminals | 25 MOhm conforming to IEC 60255-7 category 3 25 MOhm conforming to NF C 93-050 method A |
| [Uimp] rated impulse withstand voltage | 6 kV conforming to IEC 60664 6 kV conforming to IEC 60947-1 |
| short-circuit protection | 10 A cartridge fuse, type gG |
| electrical durability | 5000000 cycles, DC-13, inductive load type, 120 V, 4 W, operating rate <60 cyc/mn, load factor: 0.5, DC conforming to IEC 60947-5-1 appendix C 5000000 cycles, DC-13, inductive load type, 24 V, 10 W, operating rate <60 cyc/mn, load factor: 0.5, DC conforming to IEC 60947-5-1 appendix C 5000000 cycles, DC-13, inductive load type, 48 V, 7 W, operating rate <60 cyc/mn, load factor: 0.5, DC conforming to IEC 60947-5-1 appendix C |
| mechanical durability | 10000000 cycles |
| marking | II2 D-Ex tb IIIC T85°C Db IP66/67 |
| width | 85 mm |
| height | 95 mm |
| depth | 75 mm |