Item Details:
* Brand new and high quality
*High-quality chrome vanadium steel, mirror-plated bright chrome
*High-strength heat-treated spring, dip plastic handle
*Portable and comfortable
*Maintenance tool for Car motorcycle, ect
*Environmentally friendly, safe and, can be used for a long
*T-wrench length: 22cm/ 32cm
*Socket Hex/Plug: 16mm(0.6299in)/ 21mm(9.921in)
Instructions for use:
*Due to the location of the plug was concave shape, so first blown clean of dust a new plug,
otherwise the dust will fall into the cylinder inside.
When you unplug the power lines, some of the car when high-voltage, high-voltage plug some car was very tight,
this about shaking up and down slowly,
otherwise easy to pull off high-voltage lines. And when you plug the power lines,
you can hear a"beep" is heard, indicating that the line has been inserted in the end.
*Note wrench try to put a positive anti-straight,
avoiding wrench apron with the rear part of my touch plugs,
resulting in insulation porcelain fragmentation.
*Disassembly plug should be a loaded a demolition.
Remove the plug after the first, the cylinder should be installed on a new plug,
to avoid the smell from the plug into the cylinder position,
Once this happens, will be very tricky.
*When installing a new plug, can be coated with a layer of lubricant on the,
to protect the cylinder head, and secondly, the next dismantling more effort.
*Place a new plug, can not all at once, this way, then the two electrodes of the plug may be affected by the force,gap distance produce change, thereby seriously affecting the quality of flashover, so it should be slowly inserted and is not impatient. Socket wrench to tighten the plug, in accordance with the torque required to operate,too tight can damage the plugs
Package Contents:
1* Plug Socket
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
