Brand new Repercussion Drums DIY ELECTRONIC DRUM TRIGGER CONVERSION kit sold by the manufacturer. 

This listing is for the conversion rig only. DRUM, DRUM HEAD, ETC. are not included. They are shown only for illustrative purposes.

Convert any drum to drum to trigger electronic drum modules. Use either in a hybrid setting with your regular drum heads, or swap out your existing drum heads with mesh heads for silent triggering.

This is one of the best trigger conversion rigs available in a pre-assembled kit. Construction is heavy brass and steel, which provides enough inertia to capture stroke reliably. It is not only functionally superior, but its clean design is aesthetically pleasing and will look good on your high-end drums.

The three arm construction is robust, and it can be adjusted for small differences in diameter and height. Final adjustment is maintained by lock nuts in every position. The rig is attached to the drum by means of brass flanges designed to fit inside the drum hull and fastened with the drum's tuning lugs' supporting screws.

A quality neoprene trigger foam is conjoined to a piezo electric trigger, from the same type that big-brand OEMs utilize, and will work with most drum modules.

This is a single-zone trigger, and a visually pleasing 1/4" jack connection is provided with the kit. the connector comes with a break connection to be able to fit the jack and cabling through a drum vent (some drilling may be required to enlarge the vent), and reconnect it to the trigger rig.

THIS RIG IS SPECIFICALLY DESIGNED FOR 6-LUG DRUMS, WON'T WORK ON 10-LUG, or 8-LUG DRUMS.

PLEASE SPECIFY DRUM SIZE, 10", 12", 13", or 14"