Customer Support
Certified Refurbished weBoost Home Studio LITE Cell Signal Booster Kit (470165R)
- Works with two major U.S. carrier networks: Verizon and AT&T
- Boosts network speeds for multiple users and devices
- Improves cell signal strength and reliability in one specific room, up to 1,500 sq ft
- Compact booster with attached antenna fits on a shelf
This product has been tested and verified to be fully functional.
The weBoost Home Studio Lite cell signal booster provides a strong solution for weak indoor cellular coverage in home offices, living rooms, or apartments. It’s engineered to increase network speeds across a couple of bands supported by Verizon and AT&T in a large room.
The Home Studio Lite is easier to install with an inside antenna that attaches directly to a powerful booster. Once installed, customers will experience fewer missed messages, better voice and video quality, and faster data speeds. The booster kit supports multiple users and devices at one time. It’s only compatible with two U.S. carriers, Verizon and AT&T.
All certified refurbished products are inspected and tested and come packaged with all necessary cables and accessories.
Studio Lite Booster
Booster Antenna (311159)
4G Slim Low-Profile Antenna (314401)
Power Supply (850028)
(2) 30' Coax Cables (950630)
Barrel Connector (971129)
MODEL NUMBER
470165R
POWER
110-240V AC, 60-80Hz, 20 W
FREQUENCIES
Band 12/17 700 MHz
CONNECTORS
F-Female | SMA-Male | Barrel
Band 13 700 MHz
BOOSTER DIMENSIONS
6.125 x 3.875 x 1.125 in.
BOOSTER WEIGHT
10.2 oz.
MAX GAIN
60 dB
IMPEDANCE
75 Ohm
1. Attach Booster Antenna
Attach the Booster Antenna to Home Studio Lite Booster and place in a room where stronger cell signal is needed.
2. Mount & Point Outside Antenna
Use the U-Bolts to attach the antenna to a pole or exhaust pipe on roof and point the Outside Antenna toward the nearest cell phone tower.
3. Route & Connect Outside Antenna
Connect the white RG-6 Cable to Outside Antenna & route & connect cable to Home Studio/Home
Studio Lite Booster. All connections should be finger tightened only.
4. Power the Booster
Plug the Power Supply into wall outlet then connect into end of Booster. NOTE: We strongly recommend using a power strip with surge protection.
Before you begin a permanent installation we recommend performing a soft installation by loosely running the cables and temporarily placing components.
The antenna cable is durable enough that it can be shut in most vehicle doors.
Antennas create spheres of signal, when these spheres overlap a condition called oscillation occurs. Oscillation can be thought of as noise, which causes the booster to scale down its power or shut down to prevent damage. The best way to keep these spheres of signal from overlapping is to maximize separation between the inside and outside antennas. A solid green light on your booster indicates the booster is functioning properly. To reset the booster simply disconnect and reconnect the power supply.
Get help with DIY installation with the weBoost app! This app is an interactive guide to help with the installation of a do-it-yourself cell signal booster kit at home, in your vehicle, or at work.
Q: Why do I have poor signal?
A: There are 3 main causes why you have poor cell signal; 1: you are located too far away from the cell tower. 2: There are obstacles in the way such as hills, mountains and/or buildings. 3: Construction materials that make up your home are obvious blockers of cell service such as brick, concrete, sheet metal and tiles just to name a few.
Q: Does this come with everything needed?
A: Yes. From the cables to the mounts, this is a complete cell phone boosting solution. Now includes Command Strips, no drilling or holes required!
Q: Do I need Internet/Wi-Fi?
A: No, cell phone signal boosters do not require internet.
Q: Will it work for multiple users at once?
A: Yes. This booster raises signal for AT&T and Verizon only, and supports multiple phones simultaneously.
Q: How do I find the nearest cell tower?
A: There are free apps available for download, such as OpenSignal and the weBoost app, that willshow you where your cellular provider's cell tower is located near you.
We accept payment through PayPal, Google Pay, Apple Pay, credit cards, debit cards and gift cards. To ensure that all of our customers have equal access to our inventory, we require immediate payment.
Sales tax is charged in accordance to Marketplace Facilitator Laws.
All orders ship within two business days. Your order will be shipped via FedEx.
At this time, we only ship to physical addresses that are located within the 48 contiguous states. We are unable to ship to P.O. boxes, APO or FPO addresses, or international addresses.
Once we have confirmed that your order was picked up by the shipping carrier, we will update the tracking information via eBay.
We accept returns that are requested within 30 days of receipt of the merchandise. If you wish to begin a return, please submit a return request via eBay and a return label will be provided upon approval.
If you receive a product that was damaged in transit, please contact us as soon as possible so we can file a claim with the shipper. Please retain all the shipping packaging and contents.
For replacements and replacement parts information, please contact us through eBay Messaging.
weBoost cell phone boosters offer greater power and more options for enhancing signal at home, in the workplace, in a vehicle or even at unmanned remote sites. Patented weBoost technology allows each cell signal booster to automatically adjust to any fluctuation in signal conditions to always provide optimal signal strength.
weBoost signal boosters work with any U.S. carrier and any cellular enabled device.
Solid Signal has been helping solve cell phone signal issues since 2002. We work closely with weBoost and our staff is trained to stay up to date on the latest cell phone signal boosters!
Customer Support
Certified Refurbished weBoost Home Studio LITE Cell Signal Booster Kit (470165R)
- Works with two major U.S. carrier networks: Verizon and AT&T
- Boosts network speeds for multiple users and devices
- Improves cell signal strength and reliability in one specific room, up to 1,500 sq ft
- Compact booster with attached antenna fits on a shelf
This product has been tested and verified to be fully functional.
The weBoost Home Studio Lite cell signal booster provides a strong solution for weak indoor cellular coverage in home offices, living rooms, or apartments. It’s engineered to increase network speeds across a couple of bands supported by Verizon and AT&T in a large room.
The Home Studio Lite is easier to install with an inside antenna that attaches directly to a powerful booster. Once installed, customers will experience fewer missed messages, better voice and video quality, and faster data speeds. The booster kit supports multiple users and devices at one time. It’s only compatible with two U.S. carriers, Verizon and AT&T.
All certified refurbished products are inspected and tested and come packaged with all necessary cables and accessories.
Studio Lite Booster
4G Slim Low-Profile Antenna (314401)
Booster Antenna (311159)
Power Supply (850028)
(2) 30' Coax Cables (950630)
Barrel Connector (971129)
MODEL NUMBER
470165R
FREQUENCIES
Band 12/17 700 MHz
Band 13 700 MHz
MAX GAIN
60 dB
IMPEDANCE
75 Ohm
POWER
110-240V AC, 60-80Hz, 20 W
CONNECTORS
F-Female | SMA-Male | Barrel
BOOSTER DIMENSIONS
6.125 x 3.875 x 1.125 in.
BOOSTER WEIGHT
10.2 oz.
1. Attach Booster Antenna
Attach the Booster Antenna to Home Studio Lite Booster and place in a room where stronger cell signal is needed.
2. Mount & Point Outside Antenna
Use the U-Bolts to attach the antenna to a pole or exhaust pipe on roof and point the Outside Antenna toward the nearest cell phone tower.
3. Route & Connect Outside Antenna
Connect the white RG-6 Cable to Outside Antenna & route & connect cable to Home Studio/Home
Studio Lite Booster. All connections should be finger tightened only.
4. Power the Booster
Plug the Power Supply into wall outlet then connect into end of Booster. NOTE: We strongly recommend using a power strip with surge protection.
Before you begin a permanent installation we recommend performing a soft installation by loosely running the cables and temporarily placing components.
The antenna cable is durable enough that it can be shut in most vehicle doors.
Antennas create spheres of signal, when these spheres overlap a condition called oscillation occurs. Oscillation can be thought of as noise, which causes the booster to scale down its power or shut down to prevent damage. The best way to keep these spheres of signal from overlapping is to maximize separation between the inside and outside antennas. A solid green light on your booster indicates the booster is functioning properly. To reset the booster simply disconnect and reconnect the power supply.
Get help with DIY installation with the weBoost app! This app is an interactive guide to help with the installation of a do-it-yourself cell signal booster kit at home, in your vehicle, or at work.
Q: Why do I have poor signal?
A: There are 3 main causes why you have poor cell signal; 1: you are located too far away from the cell tower. 2: There are obstacles in the way such as hills, mountains and/or buildings. 3: Construction materials that make up your home are obvious blockers of cell service such as brick, concrete, sheet metal and tiles just to name a few.
Q: Does this come with everything needed?
A: Yes. From the cables to the mounts, this is a complete cell phone boosting solution. Now includes Command Strips, no drilling or holes required!
Q: Do I need Internet/Wi-Fi?
A: No, cell phone signal boosters do not require internet.
Q: Will it work for multiple users at once?
A: Yes. This booster raises signal for AT&T and Verizon only, and supports multiple phones simultaneously.
Q: How do I find the nearest cell tower?
A: There are free apps available for download, such as OpenSignal and the weBoost app, that willshow you where your cellular provider's cell tower is located near you.
We accept payment through PayPal, Google Pay, Apple Pay, credit cards, debit cards and gift cards. To ensure that all of our customers have equal access to our inventory, we require immediate payment.
Sales tax is charged in accordance to Marketplace Facilitator Laws.
All orders ship within two business days. Your order will be shipped via FedEx.
At this time, we only ship to physical addresses that are located within the 48 contiguous states. We are unable to ship to P.O. boxes, APO or FPO addresses, or international addresses.
Once we have confirmed that your order was picked up by the shipping carrier, we will update the tracking information via eBay.
We accept returns that are requested within 30 days of receipt of the merchandise. If you wish to begin a return, please submit a return request via eBay and a return label will be provided upon approval.
If you receive a product that was damaged in transit, please contact us as soon as possible so we can file a claim with the shipper. Please retain all the shipping packaging and contents.
For replacements and replacement parts information, please contact us through eBay Messaging.
weBoost cell phone boosters offer greater power and more options for enhancing signal at home, in the workplace, in a vehicle or even at unmanned remote sites. Patented weBoost technology allows each cell signal booster to automatically adjust to any fluctuation in signal conditions to always provide optimal signal strength.
weBoost signal boosters work with any U.S. carrier and any cellular enabled device.
Solid Signal has been helping solve cell phone signal issues since 2002. We work closely with weBoost and our staff is trained to stay up to date on the latest cell phone signal boosters!
