Endo Heated Pen
Feature:
Model:Op-fill can
be heat to 200 º C in 3s, can be melting all kinds of Gutta percha.It
support the vertical compaction of Gutta percha for the root canal
filling. It is intended exclusively for use by trained dentiet only in
clinic or laboratory.
Safety
caution:
The temperature of tip is very high during the surgery , in order to
prevent from being burned, please avoid it directly contact to the soft
tissue.
Specification:
Charging
system
Operating Voltage DC.3.6V
Adaptor Input: AC 100V/220V 50-60HZ
Power: 10w
Charging time 4 hours
Usage:
Heat: Press the button to heat the tip, the Led indicator light red.The tip can
reach working temperature within 3 second.
Charge:Put the obturation pen onto the charging base, the LED indicator light
blue.The unit should be continuous charging more than 8 hours from low voltage
to full charge.
Package
includes:
Charging Base-----1 PC
Obturation Pen-----1 PC
Pen Tip -----2PCS
&
Tooth Gum Cutter
Feature:
1. Design ingenious , Shape beautiful , Conform to the human body engineering
2. Wireless mode , Operation ,flexible, convenient
3. Rapid heating , highest temperature of 260º C
4. High-capacity can be charged Nickel cadmium battery, charging time 3 hours
5. Fever needle can be sterilized by high temperature and high pressure , repeated use.
Technical Paraments:
1. Charger voltage: AC110V or 220V 50/60HZ
2. Battery: 1.2V 2400mAh
3. Power2.5W
4. Weight: about 305g
Packing List:
1x main unit
4x tips
1x Box
1x English manual
Charging:
1.First,charge the instrument by connecting the charging station to a mains power socket
2. Plug the handipece into the socket in the charging station . While the instrument is charging,the LED lights up on the handpiece.
Use:
Fit a cutting tip onto the handpiece.Make sure that the angle of the tip is pointing in the opposite direction to the operating button,This makes work easier.
Important:
Never bend the tip while it is still in the handpiece.
1.Insert the cutting tip into the cavity while it is cold (without pressing the operating button).The gutta-percha point to be cut off must be encircled by the loop of the cutting tip.