Feature
1.Easy for installation, paste it around dashboard with double-sided adhesive tape
2.Plug and play, original car with reserved socket for quick connection, no need cut lines
3.Reads ECU data of motorcycle only, won't cause any damage
4.Super waterproofing, even soaked in water would be fine
5.Gears display once the engine working and clutch released
Specification
LED Color: Red/Green/Blue/White
(Please note us which color you want, otherwise we send in random!!!)
Color: Black
Size: 30mm *20mm *13mm
Cable length: 170cm
Gears: 1-6
Fitment
For Kawasaki models for reference:
ER-6F/ER-6N 2012-2017
Ninjia250R/Ninjia300 2013-2017
Ninjia 400R 2013-2014
Ninjia 6502012-2017
Ninjia 1000 2011-2017
Versys 650 2010-2017
Vulcan S 650 2015-2017
Vulcan 900 2011-2017
W800 2011-2017
Z300 2014-2017
Z750 2010-2012
Z750R 2011-2012
Z800 Z800e2013-2017
Z1000 2010-2017
Z1000SX ZRX 2011-2017
KVF750 2012-2016
Installation Guide
1.Find the red color 4 pole male diagnostic connector, it is usually near the ECU box. Maybe it is one removable cap and partially covered by black tape.
2.After the installation you need set it up.
A.Set your motorcycle rear wheel on the stand frame, turn on the key, the gear indicator is flashing with letter L. It means it is learning now.
B.Start your engine, the letter L will flash to number 1, now you need change gear to 1.
C.In the same way, you set gear 2,3,4,5,6, please remember you need control the tachometer with your right handlebar throttle, the gear position should compatible with your normal RPM.
D.Re-start your engine now, you can see gear number 0,1,2,3,4,5,6
Reset Gear number
If you set by mistake and some gears did not set in success, you can delete setting.
Turn on the key, when the gear number show 3 or 4 or 5, turn off the key soon.
Repeat this action 6 times, you will see gears 6,5,4,3,2,1,L. Now the deleting process is finish. You can start set gears again.
Package Include
1x Gear Indicator
1x English Manual