Free Royal Mail 24 postage and same day despatch.

The Double Wire Clamp is a very useful clip where concentrated clamping force is needed. They do not have a wide adjustment range – 3 to 6mm but the 5mm bolt transmits all its capacity to a fine contact area, and of course the smooth edges of the round wire are kind in application.

This clamp is suitable for use on corrugated PVC hose, and matches up to some of the clips commonly found on classic motor vehicles, helping you retain an OEM look for your car.

 

Band Material: Galvanised Mild Steel

Screw Material: Galvanised Mild Steel

Bandwidth: 9mm

Hex Head Size: 8mm

Size Range: 14mm – 66mm

 

Applications:

Designed for corrugated hose, this is the perfect clamp for securing corrugated PVC hoses, commonly used as pond hoses, ducting pipes, irrigation hose etc.

 

Selecting the correct size clamp:

Accurately measure the outside diameter of your hose / application.

Select the Hose Clip which size range matches the OD of your hose. 

The outer diameter of the hose tends to increase when you push the hose onto a spout or connection.

Size Example: If your hose is 29mm OD, please select the 27-31mm Double Wire clip.

 

Applying the clamp:

Safely position the hose clamp over the hose, then push the hose onto its required connection.

Firmly tighten the hose clamp on the application, ensuring that you do not exceed the recommended maximum torque of the clamp.

 

Our flexidriver is the perfect tool for tightening up our mini hose clips, featuring a 6, 7 and 8mm socket head suitable for use with the 8mm hex head on this Double Wire clip. The link to this can be found below:

https://www.ebay.co.uk/itm/302760224923

 Mikalor_W2_Listing_Description_Hose_001


The Double Wire Clamp is a very useful clip where concentrated clamping force is needed. They do not have a wide adjustment range – 3 to 6mm but the 5mm bolt transmits all its capacity to a fine contact area, and of course the smooth edges of the round wire are kind in application. This clamp is suitable for use on corrugated PVC hose, and matches up to some of the clips commonly found on classic motor vehicles, helping you retain an OEM look for your car. Designed for corrugated hose, this is the perfect clamp for securing corrugated PVC hoses, commonly used as pond hoses, ducting pipes, irrigation hose etc. Our flexidriver is the perfect tool for tightening up our mini hose clips, featuring a 6, 7 and 8mm socket head suitable for use with the 8mm hex head on this Double Wire clip. The l
The Double Wire Clamp is a very useful clip where concentrated clamping force is needed. They do not have a wide adjustment range – 3 to 6mm but the 5mm bolt transmits all its capacity to a fine contact area, and of course the smooth edges of the round wire are kind in application. This clamp is suitable for use on corrugated PVC hose, and matches up to some of the clips commonly found on classic motor vehicles, helping you retain an OEM look for your car. Designed for corrugated hose, this is the perfect clamp for securing corrugated PVC hoses, commonly used as pond hoses, ducting pipes, irrigation hose etc. Our flexidriver is the perfect tool for tightening up our mini hose clips, featuring a 6, 7 and 8mm socket head suitable for use with the 8mm hex head on this Double Wire clip. The l
The Double Wire Clamp is a very useful clip where concentrated clamping force is needed. They do not have a wide adjustment range – 3 to 6mm but the 5mm bolt transmits all its capacity to a fine contact area, and of course the smooth edges of the round wire are kind in application. This clamp is suitable for use on corrugated PVC hose, and matches up to some of the clips commonly found on classic motor vehicles, helping you retain an OEM look for your car. Designed for corrugated hose, this is the perfect clamp for securing corrugated PVC hoses, commonly used as pond hoses, ducting pipes, irrigation hose etc. Our flexidriver is the perfect tool for tightening up our mini hose clips, featuring a 6, 7 and 8mm socket head suitable for use with the 8mm hex head on this Double Wire clip. The l
The Double Wire Clamp is a very useful clip where concentrated clamping force is needed. They do not have a wide adjustment range – 3 to 6mm but the 5mm bolt transmits all its capacity to a fine contact area, and of course the smooth edges of the round wire are kind in application. This clamp is suitable for use on corrugated PVC hose, and matches up to some of the clips commonly found on classic motor vehicles, helping you retain an OEM look for your car. Designed for corrugated hose, this is the perfect clamp for securing corrugated PVC hoses, commonly used as pond hoses, ducting pipes, irrigation hose etc. Our flexidriver is the perfect tool for tightening up our mini hose clips, featuring a 6, 7 and 8mm socket head suitable for use with the 8mm hex head on this Double Wire clip. The l
The Double Wire Clamp is a very useful clip where concentrated clamping force is needed. They do not have a wide adjustment range – 3 to 6mm but the 5mm bolt transmits all its capacity to a fine contact area, and of course the smooth edges of the round wire are kind in application. This clamp is suitable for use on corrugated PVC hose, and matches up to some of the clips commonly found on classic motor vehicles, helping you retain an OEM look for your car. Designed for corrugated hose, this is the perfect clamp for securing corrugated PVC hoses, commonly used as pond hoses, ducting pipes, irrigation hose etc. Our flexidriver is the perfect tool for tightening up our mini hose clips, featuring a 6, 7 and 8mm socket head suitable for use with the 8mm hex head on this Double Wire clip. The l