This pair of adapter plates gets you out of the mismatch problem of having a 240mm AIO Radiator and 2x 140mm fans with 2x 140mm case fan slots on the case instead of 120mm fan slots and 120mm fans.

These 28mm tall adapter plates smoothly reduce the larger 140mm fan airflow circle to the 120mm size and sandwich between your radiator and fans with the fans mounted to the case and the radiator inwards. It is not possible to sandwich the other way.

If, however, you have a 280mm radiator this will not fit it. Have a look at my other listing: https://www.ebay.com/itm/304156777579

Comes with the screws you'll need; really easy just screw the radiator to the plates with the #6-32 or M4 philips screws using the underneath recessed holes. Then, use the M5 self-tapping screws to attach the adapter plates to the fans and then place the adapters and radiator assemblage to your case fan slots and screw the fans to the case from the outside of the case using the M5 self-tapping fan screws.

Supports center hole spacing on the 240mm radiator between 15mm and 19mm for maximum compatibility. It's usually 15mm or 16mm.

Your radiator will sit another 28mm inwards in the case after this - please make sure you have clearance.

Also if your radiator holes are M3 or something instead of the standard #6-32 / M4 (haven't seen it though) you will need your own screws.

Fits standard 140mm fans, 240mm radiators, and 140mm slots. Will almost certainly fit unless you have a really strange fan; if in doubt refer to the technical drawing and measure your 140mm fans, radiator, and fan slot.

If you need an adapter for other sizes to other sizes let me know and I can design one for you.

ONLY ONE ADAPTER (2 plates) AND TWENTY-FOUR (24) SCREWS INCLUDED.