Feature:

This module is a small-scale production science with high-voltage inverter transformer/supercharger finished module
The input terminal DC6V-12V voltage output can obtain tens of thousands of volts DC high voltage, can be used for scientific small batch production of high school scientific experiments, electronic equipment, negative ion generator, high voltage power supply, the module is made of Tesla coil principle
Output high voltage pulse current, small size and high efficiency

Specifications:

The peripheral circuit is simple (just plug in the switch, the battery can be used)
Working voltage: 3V-6V
Working current: 2A-4A
Input line length: about 10 cm
Output current: 0.005A
Output line length: about 12 cm
High voltage bipolar discharge distance: 1 cm - 2 cm
Continuous working time: ≤6S

Precautions for use:

1. To avoid using electricity under high voltage load, you must adjust the appropriate distance
Between the front ends of the high voltage power supply
2. Test the arc distance from short to long. It is forbidden to exceed the power supply
The maximum arc distance, because the high voltage can not release energy, easily damage the module
3. The power module, the internal should not be hot, so we can not work for a long time
4. Determine whether the battery capacity can drive the maximum power output of the battery
The voltage measurement method is the arc discharge time. If it is about 6V, you can output the maximum power
5. Two small-capacity lithium battery series is 7.2V, the measured arc state voltage has dropped to about 4V,
The capacity of the smaller voltage is pulled low. It is recommended to use the above lithium 2000MA,
The best condition for the 4000MA battery

Package:

1/2/5x pulse high voltage module

Note: