5000 Lb Power Tongue Jack Heavy Duty Electric Trailer Jack with 600D Proof Cover
Features
Attach the jack using three bolts (grade 5, 3/8”-16 UNC bolts with washers and nuts or 3/8”-16
self-tapping bolts are recommended).
Place the star washers between the flat washers and mounting
plate as shown in Fig .
The star washers are intended to penetrate through the paint on the
mounting plate to ensure direct metal to metal contact. Bolts should be tightened to 15-20 ft-lb.
If a lower support plate is not already present, install one in the bottom of the trailer frame.
Specs
Maximum Lift Capacity: 5000 lbs (continuous use)
Retracted Height:29-1/2”
Vertical Travel: 18”
Outer Tube Diameter: 2 1/4”
Power Cord Length: 5.57’,#10 gauge UL Wire
Foot Pad Diameter:5-1/2”
LED Work Lights For Easy Nighttime Hookups
·Shipping Weight: 29.15lbs
About jacks
CONTENTS OF KIT:
Removable Foot Pad
3/8” Safety Lock Pin
Manual Crank Handle
Three 3/8” Star Washers
TOOLS REQUIRED:
9/16” Wrench
Torque Wrench
Wire Cutters
Wire Strippers
Crimpers or Soldering Iron
Economy
Park your trailer on a level surface and block all dolly and trailer tires. Before operating the jack,attach the foot with the 3/8” safety lock pin provided.
Disconnect the jack from the power source.
Remove the rubber access cover on the top of the jack.
Insert the manual crank handle into the access hole on the top of the jack, engaging the drive screw.
Rotate the manual crank handle counter-clockwise to extend the jack, and clockwise to retract it.
Remove manual crank handle and replace manual override plug.