Here we have a NEW GASKET OR SEAL KIT including 320W10 Style SAPPHIRE Crystal for the SEIKO 6105-8110 and 6105-8119 "WILLARD" Diver's Watch.

NOW AVAILABLE IN MY HEAVY DUTY BLUE EPDM MATERIAL.

THE CROWN SEAL IS DESIGNED TO BE INSTALLED INSIDE THE CROWN. THE CROWN WILL NEED TO BE PRESSED APART USING THE "GASKET STUFFING" METHOD, THEN PRESSED TOGETHER AGAIN WITH THE NEW SEAL. IF UNSURE HOW TO PERFORM THIS PROCEDURE, DO NOT PURCHASE THIS KIT. IT IS DESIGNED FOR A WATCHMAKER OR ADVANCED HOBBYIST WITH THE CORRECT TOOLS TO DO THE JOB.

Included in the kit are the following seals -

1 x VTA Crown Seal

1 x VTA 0C3660B Bezel Seal

1 x VTA 0C3060B Caseback Seal

1 x VTA EC3160 Crystal L Profile Seal

1 x 320W10GN Style SAPPHIRE Crystal

The Vintage Time Australia Seal sets are an exact fit for this model and are based on the original specifications of the seals.

Please note these seal sets are designed to fit OEM pushers and crowns. Aftermarket parts may have fitting issues or require modification as they often aren't made to OEM spec. Please also check the caseback has not been swapped before buying. This is a common issue with these watches and can make identification difficult.

Water resistance is guaranteed to the original specification (100m) as long as the seals are fitted correctly, the correct crystal is fitted and there is no corrosion in the case. (Tested on a Witschi ALC-2000 Pressure tester)

I now have several postage options available. Please note there is no tracking or signature requirement included in economy postage.

For more SEIKO related information and help try the WristSushi Forum -

http://www.wristsushi.com

My website and blog is here -

http://www.vintagetimeaustralia.com