Specifics:

Product:  Brand new complete  Remote Fob - Program yourself
Type: Remote for  central locking  
Quantity x 1

Suitable for following models:

This is a NEW high quality aftermarket replacement remote  
 Remote Electronics (internals) with battery ready for programming
 
 
       
Package Content:
 
1x 3 button remote case 
1x Battery
1 x circuit board

 Remote Programming procedure

1.            Open Driver side door

2.            Put the Original key in and out of ignition 2 times

3.            Close and open driver door 2 times

4.            Original Key in and out of ignition once (do not turn key)

5.            Shut and open door twice

6.            Close door

7.            Put Original Key in the ignition and Turn ignition on

8.            Turn ignition off and remove key

9.            Door locks will cycle (lock and unlock)

10.         Do the following for all remotes (one at a time):

Press lock and unlock together for 1s, then press the lock button

11.         Locks will cycle for each key.

12.         To exit programming mode, put key in ignition turn to on then off

13.         Remove key from ignition, close door and test remote

To Delete All Remotes from the Vehicle

At Step 7, turn the key on and off 5 times then remove key, door locks will cycle 5 times. Turn the key on then off. Open shut door. All remotes that were coded into the car, have now been removed.

Shipping

Items are posted from Queensland within 2 business days

Please allow 7 to 14 business days with Australia Post

We recommend paying extra with tracking for quicker postage times